Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards.
If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
|
| Maximum height of the dishes in | |
|
| upper basket | lower basket |
|
|
|
|
|
|
|
|
With upper basket raised | 20 cm | 31 cm |
For best results we recommend you to use the cutlery grids provided (if the size and dimensions of the cutlery allow it).
The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them
UI63 |
With upper basket lowered | 24 cm | 27 cm |
To move to the higher position proceed as follows:
1.Move the front runner stops (A) of the upper basket outwards and slide the basket out.
2.Refit the basket in the higher position and replace the stops
(A) in their original position.
horizontally in opposite directions and pull them apart. To reassemble, reverse the procedure.
UI62 |
When the basket is in the higher position you will not be able to use the cup rack(s).
RC01 |
After loading your machine always close the door, as an open door can be a hazard.
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water can reach all surfaces.
Glasses with long stems can be placed upside down in the cup racks. Light items (plastic bowls
etc.) must be loaded in the upper basket and arranged so they do not move.
US47
In case that plates are loaded in the upper basket:
load them starting from the rear positions of the basket; tilting them slightly forwards and avoiding the front positions near the door.
US71 |
Before closing the door, ensure that the spray arms can rotate freely.
9