Zanussi DWS 919 manual Adjusting the worktop, Fitting under a counter, Levelling

Page 23

Adjusting the worktop

You can move the worktop forward or backward by 25

mmin order to align the machine with other kitchen units.

Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

-Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on the levelling spacers, either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

IN26

570⎟

600

820

600

IN05

23

INS18en

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Dishwasher Contents During Use Important safety informationInstallation Child SafetyProgramme guide Description of the applianceControl panel Before use Setting the water softenerFilling with salt Ensure that the lid is closed after every refill Adjusting the doseRinse aid Cutlery basket Using your applianceLoading your appliance Lower basketTo move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket Use of detergent If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Items not suitable for dishwashers Hints and tipsTo save energy For best washing and drying results50C Washing programmesLight soil Operating sequence Cleaning the large filter Maintenance and cleaningInternal cleaning Cleaning the central filterMoving the machine External cleaningFrost precautions Prolonged periods of non-operationSomething not working Customer Care Department Service and spare partsThis guarantee does not cover Guarantee conditionsStandard guarantee conditions European GuaranteeHints for test centres Technical specificationsLocknut must be correctly fitted to avoid water leaks Installation instructionsWater supply connections Water outlet hose connection Proceed as follows Electrical connectionGreen and Yellow -Earth Blue-Neutral Brown-Live Levelling Adjusting the worktopFitting under a counter
Top Page Image Contents