Blaupunkt Dallas RMD 169 Tips on adjusting the equalizer, Lower mid-range, Mid-range, Treble

Equalizer setting

Tips on adjusting the equalizer

Begin adjustment with the mid-range/treble and complete it with the bass range.

Frequency ranges	Tonal effect/problem	Measure
Bass range
30 to 100 Hz	Bass response too weak	Increase the bass with
		Filter: “LOW EQ”
		Frequency: 50 to 100 Hz
		Level: +4 to +6 dB
Lower mid-range
100 to 400 Hz	Bass not clean	Reduce the lower mid-frequen-
	Booming	cies with Filter: “LOW EQ”
	Unpleasant pressure on the ears	Frequency: 125 to 400 Hz
		Level: Approx. -4 dB
Mid-range
400 to 4 000 Hz	Sound lacks depth,	Reduce the mid-frequencies
	aggressive, no stereo effect	with Filter: “HIGH EQ”
		Frequency: 1 000 to 2 500 Hz
		Level: -4 to -6 dB
Treble
4 000 to 20 000 Hz	Response is dull	Increase the treble range with
	Clarity lacking	Filter: “HIGH EQ”
	Instruments lack brilliance	Frequency: Approx. 10 kHz
		Level: +2 to +4 dB

Note

Avoid distortion.

Raise the level cautiously if the loudspeaker diameter is too small.

The tonal response may be- come too thin and aggressive. Pay attention to the fundamen- tal tone range of the music.

Reproduction must not be- come too faint.

Tonal response too weak.

Avoid a sharp tonal response. Loud hissing impairs the quali- ty.

ENGLISH

29