Programming with DSC
STEREO/MONO
Toggle << >>.
The display indicates the se- lected state briefly. STEREO is selected auto- matically when the unit is switched on.
AMP DELAY Energization delay of exter- nal amplifiers. DLAY OFF signifies no energization de- lay. DLAY 1 to DLAY 4 sig- nify the energization delay in seconds.
CLK AUTO/MAN
For activating/deactivating automatic hours correction. Refer also to “CLOCK time, hours correction”.
12/24H MODE
Select the time display
CLK ON/OFF The time can be displayed with the ignition on and the unit switched off. Select CLK ON in this case.
SCANTIME This setting defines the sampling time (5 - 30 sec- onds) for radio broadcasts and CD tracks.
AUX ON/OFF This menu item does not ap- pear when a CD changer is connected. “OFF” is the de- fault factory setting.
If an external unit is con- nected through AUX, “ON” must be selected.
LEARN KC This function enables you to teach in a second KeyCard.
ENGLISH
CDC NAME | Displayed only in CD replay | BEEP | Confirmation signal for func- |
| mode. |
| tions which require a key to |
| You can use this function to |
| be held down for approx. 1 |
| assign any desired name to |
| second. |
| the CDs. (Refer to “Assign- |
| The volume can be selected |
| ing names to CDs”.) |
| from 0 to 9 (0 = off). |
CLOCKSET | Manual adjustment of the | LED ON/OFF You can select between | |
| time. |
| LED ON and LED OFF. |
| Use << >> to select hours/ |
| When LED ON is selected, |
| minutes. The flashing range |
| the “ON” knob flashes to |
| can be adjusted with / . |
| provide additional security |
| Press ENT briefly to save |
| when the unit is switched off |
| after completing the setting. |
| and the KeyCard removed. |
| Refer also to “CLOCK time”. |
|
|
Refer to the instructions un- der “KeyCard
READ KC The data can be read out from a KeyCard.
Unit data such as name, type number (76...) and seri- al number are displayed by the KeyCard supplied. Should you remove the Key- Card during the read pro- cess, “READ KC” appears in the display.
31
