Blaupunkt Dallas RMD 169 operating instructions Condensed instructions, Next FM, Next AM, AMT, Bnd

Condensed instructions

3 Adjusting the volume	Menu level 1	Menu level 2
Turn the knob to adjust the volume.	Station keys and memory levels	Adjusting radio functions

ENGLISH

The selected value is shown on the display. When switched on, the unit plays at the preselected volume (ON VOL).

ON VOL can be changed (refer to “Programming with DSC – ON VOL”).

4Softkeys/display

Softkey = key with variable function. The functions shown in the display can be selected.

Radio mode

In radio mode, use TU to toggle be- tween menu level 1 and menu level 2. The system automatically returns to menu level 1 when no key has been pressed for eight seconds.

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM, AMT

Switch between the AM and AMT fre- quency bands.

ST1 - ST6

ST1- ST6 can be used on this menu level to store radio stations on the FM levels I, II and “T”.

You can store six stations each on the AM and AMT bands.

Store station –press one of the sta- tion buttons ST1- ST6 until the station can be heard again (beep).

Call up station –select the frequency band. On FM, select the memory level using NEXT and press the appropriate station key briefly.

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM, AMT

Switch between the AM and AMT fre- quency bands.

BND

Select the frequency band and memo- ry level (FM I, FM II, FM T, AM, AMT).

SCA - Scan

a)PTY is deactivated (logo is lit nor- mally, not in reverse video)

Press SCA (Radio Scan) briefly – “SCAN” appears in the display alter- nately with the code of the sampled station. All stations on the frequency band which can be received are sam- pled briefly.

5