Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

To cancel a washing programme in progress

●To cancel a washing programme you have to reset the dishwasher; press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the running programme starts flashing for about 2 seconds. After about 2 seconds all the indicator lights will turn off (except for the On/Off indicator light) indicating that the running programme has been cancelled.

3.Close the dishwasher door

4.Press the On/Off push button

The On/Off indicator light illuminates.

5. Setting and starting the programme

To select a programme, press the push button of the programme you wish to select, the indicator light of the push button illuminates and in the digital display will appear, flashing, the running time of the programme that has been set. The phase indicator lights foreseen for that programme will illuminate.

After about 3 seconds from the last pressure of a push button the programme starts automatically.

In the digital display the running time of the programme is no longer flashing and the indicator lights of the phases will turn off except for the phase underway.

7. Setting the "delay start"

The setting of the delay start occurs before selecting the programme

●Press the On/Off push button.

●Press the delay start push button until the flashing number of the hours for the delay start appear in the digital display.

●Select a washing programme. In the digital display will appear, for a moment, the running time of the programme and then again appears the selected delay start time.

●As soon as the number of hours is displayed without flashing, the countdown for the delay start is active. The countdown will decrease with steps of 1 hour.

●The opening of the door during the countdown will not modify the delay start.

●Once the delay start has elapsed the programme will start automatically.

6. To interrupt, change or cancel a washing programme in progress

Interrupt, change or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To interrupt a washing programme in progress

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.

b)Press the On/Off push button (in this case all the indicator lights turn off). Press the On/Off push button again; the programme will start from the point in which it was interrupted.

To change a washing programme

a)If you want to change the washing programme within the 3 seconds before the start of the programme, simply press the push button of another programme, in the digital display will appear the running time of the new programme.

b)If you want to change a washing programme in progress, press the push button of another programme for about 6 seconds. The indicator light of the new selected programme will illuminate and in the digital display will also appear the running time of the programme. (Once selected a new programme, this will start from the beginning).

To change the "delay start"

●As long as the washing programme has not yet started, you can change the number of hours for the delay start by pressing the delay start push button.

To cancel the "delay start"

●As long as the washing programme has not yet started, you can cancel the delay start setting by pressing the delay start push button until in the digital display appears the time duration of the selected programme.

The washing programme will start immediately.

To change a programme after the start of the the "delay start"

●If you want to change the selected washing programme once the countdown for the delay start is running, press for about 6 seconds the push button of another programme. The indicator light of the new selected programme will illuminate and in the digital display will also appear, for a moment, the running time of the new selected programme. In the digital display will reappear the delay time and the countdown continues.