Zanussi DE 6954 manual Hints for test centres

Page 22

Hints for test centres

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).

 

Load:

12 standard place settings

 

 

 

 

 

 

 

 

Rinse aid setting

 

 

 

 

Rinse aid dispenser (type A):

position 4 (Type III)

 

 

Rinse aid dispenser (type B):

position 5 (Type III)

 

 

 

 

 

 

 

 

Detergent dosage :

5 g + 25 g (Type B)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Arrangement upper basket

Arrangement lower basket

Arrangement cutlery basket

Arrangement cutlery basket

22

Image 22
Contents Dishwasher Contents Child safety Safety instructionsInstallation DisposalControl panel Description of the applianceDigital display indicates Setting electronically Prior to using for the first timeSetting the water softener Setting manuallyTo fill Adjusting the doseFilling with salt Rinse aidRinse aid dispenser type B Inflow of rinse aid activated factory settingDeactivation/activation of the inflow of rinse aid Inflow of rinse aid deactivatedLower basket Daily useLoading cutlery and dishes Are of limited suitabilityUpper basket Adjusting the height of the upper basketCutlery basket Removable knife basketDetergent dispenser type a Use of detergentFill with detergent Detergent dispenser type BConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsWashing programmes Auto washing programmeStarting a washing programme Setting and starting the programmeSetting the delay start Close the dishwasher door Press the On/Off push buttonEnd of the washing programme Unloading the dishwasherFrost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault Possible cause SolutionsDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsTel 08705 European Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsLevelling Installation instructionsFitting under a counter Water supply connectionsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Hints for test centres Page From the Electrolux Group. The world’s No.1 choice Electrolux plc