Zanussi ZT 685 manual Building-in, Adjusting the height of the appliance

Page 27

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

It is essential that the recess dimensions indicated in the diagram are followed.

No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The recess height may be anywhere between 820 and 880 mm from the floor as the dishwasher incorporates adjustable feet (max 60 mm).

A distance of 2 mm should be allowed between the top of the dishwasher and the counter top.

Adjusting the height of the appliance

To adjust the height proceed as follows:

1.Loosen or tighten the two front feet.

2.The rear foot is adjusted by turning the screw in the middle of the front kick plate to the left or right.

A pad is supplied for the rear foot to make sliding the appliance in and out of the recess easier.

To fit the pad, press it onto the rear foot.

If required, the dimensions of this pads can be reduced by breaking it where marked.

 

596

 

880

 

 

⎟

 

 

820

 

 

 

878

 

550

600

⎟

 

max

 

818

 

 

 

 

 

-

 

 

 

 

+

 

 

II64

 

 

 

II52

Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on the levelling spacers, either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

IN11

IN12

27

PFI20UK

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Dishwasher Interest of the environment Important safety informationContents Description of the appliance Control panel Salt refill indicator lightOn/Off indicator light Programme selector buttons End of cycle indicator lightTo select a different level proceed as follows Before useTo fill Filling with saltEnsure that the lid is closed after every refill Adjusting the doseRinse aid Filling with Rinse AidTo fill the dishwasher with detergent proceed as follows Use of detergentCompact detergents with enzymes Using your appliance Loading your applianceLower basket Cutlery basket To lower the basket to the original position Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsTo save energy Hints and tipsWashing programmes Testing programme according to IEC 436/DINStart the programme Operating sequenceCheck the filters Check that there is rinse aid and salt Load the dishesCleaning the large filter Maintenance and cleaningInternal cleaning Cleaning the central filterMoving the machine External cleaningFrost precautions Prolonged periods of non- operationSomething not working Symptom Fault code SolutionSymptom Solution 0990 Service and spare partsThis guarantee does not cover Guarantee ConditionsStandard guarantee conditions European GuaranteeTechnical specifications Installation instructionsWater supply connections Remove all packaging before positioning the machineLocknut must be correctly fitted to avoid water leaks Water outlet hose connection Electrical connection Green and Yellow Earth Blue Neutral Brown LiveProceed as follows Adjusting the height of the appliance To adjust the height proceed as followsBuilding-in Mounting the furniture door onto the door Furniture doorSecuring to the adjacent units Depth Noise protectionPage 02/99

ZT 685 specifications

The Zanussi ZT 685 is an innovative and efficient cooling solution designed to meet the needs of modern households. This refrigerator, characterized by its intelligent features and sleek design, elevates kitchen aesthetics while providing practicality and convenience.

One of the standout features of the Zanussi ZT 685 is its advanced cooling technology, which ensures optimal food preservation. The efficient cooling system maintains consistent temperatures, preventing spoilage and ensuring that fresh produce, dairy, and leftovers remain at their best. With even cooling distributed across all shelves, users can have peace of mind knowing that their groceries will stay fresher for longer.

The refrigerator incorporates a user-friendly interface, featuring intuitive controls that simplify the adjustment of settings. Led lights illuminate the interior, making it easy to locate items even in low light conditions. With adjustable shelves, the Zanussi ZT 685 offers flexibility to accommodate larger items or rearrange for better organization, catering to the diverse needs of any family.

Energy efficiency is at the forefront of the Zanussi ZT 685's design. This refrigerator boasts an impressive energy rating, translating to lower electricity bills and a reduced environmental footprint. Utilizing the latest energy-saving technologies, it proves that one can be eco-conscious without compromising on performance.

The Zanussi ZT 685 also emphasizes hygiene and maintenance. Its special anti-bacterial surfaces inhibit the growth of harmful pathogens, contributing to a healthier kitchen environment. Additionally, the easy-to-clean design of the interior ensures that maintaining cleanliness is hassle-free.

Another remarkable aspect of the Zanussi ZT 685 is its spacious storage capacity. With well-designed compartments and drawers, the refrigerator maximizes space utilization, providing ample room for all types of food items. From wide shelves for bottles to dedicated vegetable crisper drawers, everything has a dedicated place, promoting organization and accessibility.

In summary, the Zanussi ZT 685 combines technology, efficiency, and convenience into one sleek package. Its advanced cooling technology, user-friendly design, energy efficiency, and emphasis on hygiene make it an excellent choice for discerning consumers who value quality and functionality. With this refrigerator, Zanussi continues to uphold its commitment to creating innovative appliances that enhance everyday living.
Top Page Image Contents