Zanussi ZSF 6150 S manual Rinse aid, Filling with rinse aid, Adjusting the dose

Page 8

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1.Open the container by pressing the release button (A).

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Top up the rinse aid when the indicator light on the control panel illuminates.

●If you are using dishwasher detergent that already contains rinse aid, it is necessary to deactivate the rinse aid dispenser, in order to avoid a double dosage.

Deactivation/activation of the rinse aid dispenser

(The dishwasher must be switched off)

Factory setting: rinse aid dispenser activated

When the rinse aid dispenser has been deactivated, the rinse aid indicator light on the control panel is automatically deactivated.

1.Press the On/Off button. The On/Off indicator light illuminates (setting mode).

If a programme button indicator light is on, this means that a washing programme has been set. The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds.

All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.

2.Press simultaneously function buttons 2 and 3, until the indicator lights of the function buttons 1, 2 and 3 start flashing.

3.Press the function button 2, the indicator lights of function buttons 1 and 3 turn off while the indicator light of the function button 2 goes on flashing, at the same time the indicator light End of cycle illuminates indicating that the rinse aid dispenser is active.

4.To deactivate the rinse aid dispenser, press the function button 2 again, the indicator light End of cycle turns off, indicating that the rinse aid dispenser has been deactivated.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

To activate the rinse aid dispenser follow the above instructions until the indicator light End of cycle illuminates.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Control panelPage Prior to using for the first time Indicator lightWater softener ExamplesFilling with dishwasher salt To fillAdjusting the dose Rinse aidFilling with rinse aid Deactivation/activation of the rinse aid dispenserDaily use Loading cutlery and dishesLower basket Are of limited suitabilityAdjusting the height of the upper basket Cutlery basketUpper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Automatic washing programmeSetting and starting the programme To interrupt or cancel a washing programme in progressStarting a washing programme End of the washing programmeMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Fitting under a counterLevelling Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Hints for test centres Cup racks position aPage From the Electrolux Group. The World’s No.1 choice

ZSF 6150 S, ZSF 6150 specifications

The Zanussi ZSF 6150 and ZSF 6150 S are advanced dishwashers designed to deliver exceptional performance and convenience in the kitchen. With their sleek designs, these machines blend seamlessly into any home environment while providing impressive cleaning capabilities.

One of the standout features of the Zanussi ZSF 6150 and ZSF 6150 S is their energy efficiency. Both models are equipped with the latest technologies that ensure optimal water and electricity usage, significantly reducing the overall running costs. They are rated highly for energy efficiency, making them an environmentally friendly choice for homeowners looking to cut down on their carbon footprint.

The spacious interior of these dishwashers is another highlight, capable of accommodating up to 13 place settings. This makes them perfect for families and those who frequently host gatherings. The adjustable baskets provide flexibility in loading various types of dishes, from tall pots to delicate glassware. The models also include a half-load option, allowing for efficient washing even when the dishwasher is not full.

Innovative cleaning technologies elevate the ZSF 6150's performance. The integrated SensorControl system intelligently monitors the level of dirt and adjusts the wash cycle accordingly. This ensures that each wash is tailored to the load, delivering thorough cleaning without wasting resources. Additionally, the innovative AquaStop feature provides peace of mind by preventing leaks and water damage.

The user-friendly interface on both models makes operation straightforward. The electronic control panel offers different washing programs, including intensive, eco, and rapid cycles, catering to various cleaning needs and time constraints. The delayed start function is another convenient feature, allowing users to schedule washes at their convenience — especially handy for saving energy during off-peak hours.

Noise level is another critical aspect of the ZSF 6150 and ZSF 6150 S. With a low decibel rating, these dishwashers operate quietly, making them suitable for open-plan living spaces where noise can be an issue.

In conclusion, the Zanussi ZSF 6150 and ZSF 6150 S are designed with modern technology and user convenience in mind. Their energy efficiency, spacious interiors, advanced cleaning technologies, and quiet operation make them an excellent addition to any kitchen. For those seeking an effective and reliable dishwasher, these models stand out as compelling choices that balance performance with sustainability.
Top Page Image Contents