Zanussi ZSF 6150 What to do, when, Flashing fault code appears, Fault Possible cause Solutions

Page 16

What to do, when...

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer.

...a flashing fault code appears

The dishwasher will not start or stops during operation. All buttons are inoperative except for the On/Off button and a combination of indicator lights, as indicated in the following chart, are flashing.

Open the dishwasher’s door and carry out the following suggested corrective actions.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee.

Fault code / malfunction

Possible cause

Solutions

 

 

 

 

 

- Indicator light of the

The water tap is blocked or furred with

Clean the water tap.

programme in progress is

limescale.

 

 

flashing.

 

 

 

The water tap is turned off.

Turn the water tap on.

- 1 flash of the indicator

 

 

 

 

 

 

The filter (where present) in the threaded hose

Clean the filter in the threaded hose

light "End of cycle".

 

 

fitting at the water inlet valve is blocked.

fitting.

 

 

 

 

 

The machine does not fill with

 

The water inlet hose has not been correctly laid

Check the water inlet hose connection.

water.

or it is bent or squashed.

 

 

 

 

 

 

 

 

 

 

 

- Indicator light of the

The sink spigot is blocked.

Clean out the sink spigot.

programme in progress is

 

 

 

flashing.

 

 

 

 

 

The water drain hose has not been correctly laid

Check the water drain hose connection.

- 2 flashes of the indicator light

or it is bent or squashed.

 

 

"End of cycle".

 

 

 

 

 

The dishwasher will not drain.

 

 

 

 

 

 

- Indicator light of the

Anti-flood device is activated.

Close the water tap and contact your

programme in progress is

 

local Service Force Centre.

flashing.

 

 

 

- 3 flashes of the indicator light

 

 

 

"End of cycle".

 

 

 

 

 

 

 

 

Once the checks have been carried out, close the door and press the button of the programme that was running before the intervention of the alarm, the programme will continue from the point at which it was interrupted. If the fault code reappears contact your local Service Force Centre.

For other combinations of fault codes not described in the above chart will appear, please contact your local Service Force Centre.

...there are problems when operating the dishwasher

Fault

Possible cause

Solutions

 

 

 

 

 

 

The dishwasher door has not been properly

Close the door.

The programme does not start

closed.

 

 

 

The main plug is not plugged in.

Insert the mains plug.

 

 

 

 

 

 

 

 

The fuse has blown in the household fuse box.

Replace the fuse.

 

 

 

There is a whistling noise during

The whistling is not a cause for concern.

Use a different brand of detergent.

washing

 

 

 

 

 

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Control panelPage Prior to using for the first time Indicator lightWater softener ExamplesFilling with dishwasher salt To fillAdjusting the dose Rinse aidFilling with rinse aid Deactivation/activation of the rinse aid dispenserDaily use Loading cutlery and dishesLower basket Are of limited suitabilityAdjusting the height of the upper basket Cutlery basketUpper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Automatic washing programmeSetting and starting the programme To interrupt or cancel a washing programme in progressStarting a washing programme End of the washing programmeMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Fitting under a counterLevelling Water supply connectionsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Hints for test centres Cup racks position aPage From the Electrolux Group. The World’s No.1 choice

ZSF 6150 S, ZSF 6150 specifications

The Zanussi ZSF 6150 and ZSF 6150 S are advanced dishwashers designed to deliver exceptional performance and convenience in the kitchen. With their sleek designs, these machines blend seamlessly into any home environment while providing impressive cleaning capabilities.

One of the standout features of the Zanussi ZSF 6150 and ZSF 6150 S is their energy efficiency. Both models are equipped with the latest technologies that ensure optimal water and electricity usage, significantly reducing the overall running costs. They are rated highly for energy efficiency, making them an environmentally friendly choice for homeowners looking to cut down on their carbon footprint.

The spacious interior of these dishwashers is another highlight, capable of accommodating up to 13 place settings. This makes them perfect for families and those who frequently host gatherings. The adjustable baskets provide flexibility in loading various types of dishes, from tall pots to delicate glassware. The models also include a half-load option, allowing for efficient washing even when the dishwasher is not full.

Innovative cleaning technologies elevate the ZSF 6150's performance. The integrated SensorControl system intelligently monitors the level of dirt and adjusts the wash cycle accordingly. This ensures that each wash is tailored to the load, delivering thorough cleaning without wasting resources. Additionally, the innovative AquaStop feature provides peace of mind by preventing leaks and water damage.

The user-friendly interface on both models makes operation straightforward. The electronic control panel offers different washing programs, including intensive, eco, and rapid cycles, catering to various cleaning needs and time constraints. The delayed start function is another convenient feature, allowing users to schedule washes at their convenience — especially handy for saving energy during off-peak hours.

Noise level is another critical aspect of the ZSF 6150 and ZSF 6150 S. With a low decibel rating, these dishwashers operate quietly, making them suitable for open-plan living spaces where noise can be an issue.

In conclusion, the Zanussi ZSF 6150 and ZSF 6150 S are designed with modern technology and user convenience in mind. Their energy efficiency, spacious interiors, advanced cleaning technologies, and quiet operation make them an excellent addition to any kitchen. For those seeking an effective and reliable dishwasher, these models stand out as compelling choices that balance performance with sustainability.
Top Page Image Contents