Zanussi ZSF 6120 manual Starting a washing programme, Setting and starting the programme

Page 13

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

7. End of the washing programme

The dishwasher will automatically stop and the End of cycle phase indicator light will illuminate.

The indicator light of the programme just ended will remain on.

2.Turn on the water tap

3.Close the dishwasher door

4.Press the On/Off push button

The On/Off indicator light will come on (setting mode).

5. Setting and starting the programme

Press the push button corresponding to the required programme (see "Washing programmes" chart).

The indicator light corresponding to the programme and the phase indicator lights foreseen for that programme will start blinking.

After about 3 seconds from the last pressure of a push button the programme starts automatically.

Once the programme has started the phase indicator lights will turn off except for the phase under way.

Note: it is possible to select a washing programme also with the door slightly opened.

In this case the start of the programme will occur after the closure of the door. Until this moment it is possible to change the setting made.

a)Press On/Off push button.

b)Select a washing programme.

c)Close the door.

The programme or the countdown will start automatically after the closure of the door.

6. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To interrupt a washing programme in progress

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.

b)Press the On/Off push button (in this case all the indicator lights turn off). Press the On/Off push button again; the programme will start from the point in which it was interrupted.

To cancel a washing programme in progress

To cancel a washing programme in progress, press simultaneously the function push buttons 2 and 3 until all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled.

(If a new washing programme will be selected, check that there is detergent in the detergent dispenser).

Switch off the dishwasher by pressing the On/Off push button, the On/Off indicator light turns off.

Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

8. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalControl panel Description of the applianceIndicator light Prior to using for the first timeWater softener ExamplesTo fill Filling with saltRinse aid Adjusting the doseFilling with rinse aid Deactivation/activation of the dosage of rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityCutlery basket Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsFill with detergent Use of detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes To interrupt or cancel a washing programme in progress Setting and starting the programmeStarting a washing programme Unloading the dishwasherCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Hints for test centres Page Page From the Electrolux Group. The world’s No.1 choice

ZSF 6120 specifications

The Zanussi ZSF 6120 is a compact and efficient dishwasher designed to meet the needs of modern households. With its sleek design and user-friendly interface, this appliance offers a blend of functionality and style that can enhance any kitchen environment.

One of the standout features of the ZSF 6120 is its energy efficiency. Rated A+, this dishwasher consumes less energy than traditional models, thereby reducing both your utility bills and environmental impact. Its efficient water usage further contributes to its eco-friendly credentials, allowing users to wash a full load while using minimal resources.

This model boasts a spacious interior that can accommodate up to 10 place settings, making it suitable for small to medium-sized families. The adjustable upper rack is a notable feature, allowing users to customize the interior space to fit larger pots and pans without compromising other items.

Equipped with five washing programs, including Eco, Intensive, and Quick Wash, the ZSF 6120 offers versatility for different types of dishware and levels of soiling. The Eco program provides an energy-saving option, while the Intensive setting is designed for heavily soiled items, ensuring optimal cleaning results every time.

In addition to its washing capabilities, the appliance features a delay start option, allowing users to schedule their wash cycles up to 24 hours in advance. This is particularly useful for taking advantage of off-peak energy rates or ensuring that dishes are clean and ready when needed.

The ZSF 6120 is also designed with user convenience in mind. The intuitive control panel is easy to navigate, and the bright LED display provides clear information about the selected cycle and remaining time. Furthermore, the low noise level during operation, at just 49 dB, ensures that the dishwasher runs quietly in the background without disturbing household activities.

Safety is a priority in the ZSF 6120, which is equipped with features like a child lock to prevent accidental opening during operation. It also includes a flood protection system, which safeguards your home from potential water damage.

Overall, the Zanussi ZSF 6120 is a reliable and efficient dishwasher that combines modern technology with practical design. Whether you're looking for energy-saving features, versatility in washing options, or a quiet operation, this model delivers on all fronts, making it an excellent addition to any home.
Top Page Image Contents