Zanussi ZSF 6120 manual Installation instructions, Fitting under a counter, Levelling

Page 19

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570

-

 

600

820

 

600

 

IN05

 

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the consumer service department.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyControl panel Description of the applianceExamples Prior to using for the first timeIndicator light Water softenerTo fill Filling with saltDeactivation/activation of the dosage of rinse aid Adjusting the doseRinse aid Filling with rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketTo move to the higher position proceed as follows Adjusting the height of the upper basketCutlery basket Upper basketFill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Unloading the dishwasher Setting and starting the programmeTo interrupt or cancel a washing programme in progress Starting a washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeWater supply connections Installation instructionsFitting under a counter LevellingElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Hints for test centres Page Page From the Electrolux Group. The world’s No.1 choice

ZSF 6120 specifications

The Zanussi ZSF 6120 is a compact and efficient dishwasher designed to meet the needs of modern households. With its sleek design and user-friendly interface, this appliance offers a blend of functionality and style that can enhance any kitchen environment.

One of the standout features of the ZSF 6120 is its energy efficiency. Rated A+, this dishwasher consumes less energy than traditional models, thereby reducing both your utility bills and environmental impact. Its efficient water usage further contributes to its eco-friendly credentials, allowing users to wash a full load while using minimal resources.

This model boasts a spacious interior that can accommodate up to 10 place settings, making it suitable for small to medium-sized families. The adjustable upper rack is a notable feature, allowing users to customize the interior space to fit larger pots and pans without compromising other items.

Equipped with five washing programs, including Eco, Intensive, and Quick Wash, the ZSF 6120 offers versatility for different types of dishware and levels of soiling. The Eco program provides an energy-saving option, while the Intensive setting is designed for heavily soiled items, ensuring optimal cleaning results every time.

In addition to its washing capabilities, the appliance features a delay start option, allowing users to schedule their wash cycles up to 24 hours in advance. This is particularly useful for taking advantage of off-peak energy rates or ensuring that dishes are clean and ready when needed.

The ZSF 6120 is also designed with user convenience in mind. The intuitive control panel is easy to navigate, and the bright LED display provides clear information about the selected cycle and remaining time. Furthermore, the low noise level during operation, at just 49 dB, ensures that the dishwasher runs quietly in the background without disturbing household activities.

Safety is a priority in the ZSF 6120, which is equipped with features like a child lock to prevent accidental opening during operation. It also includes a flood protection system, which safeguards your home from potential water damage.

Overall, the Zanussi ZSF 6120 is a reliable and efficient dishwasher that combines modern technology with practical design. Whether you're looking for energy-saving features, versatility in washing options, or a quiet operation, this model delivers on all fronts, making it an excellent addition to any home.
Top Page Image Contents