Zanussi ZSF 6120 manual Water outlet hose connection, Electrical connection

Page 20

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Control panelPrior to using for the first time Indicator lightWater softener ExamplesFilling with salt To fillAdjusting the dose Rinse aidFilling with rinse aid Deactivation/activation of the dosage of rinse aidDaily use Loading cutlery and dishesLower basket Are of limited suitabilityAdjusting the height of the upper basket Cutlery basketUpper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Setting and starting the programme To interrupt or cancel a washing programme in progressStarting a washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Fitting under a counterLevelling Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Hints for test centres Page Page From the Electrolux Group. The world’s No.1 choice

ZSF 6120 specifications

The Zanussi ZSF 6120 is a compact and efficient dishwasher designed to meet the needs of modern households. With its sleek design and user-friendly interface, this appliance offers a blend of functionality and style that can enhance any kitchen environment.

One of the standout features of the ZSF 6120 is its energy efficiency. Rated A+, this dishwasher consumes less energy than traditional models, thereby reducing both your utility bills and environmental impact. Its efficient water usage further contributes to its eco-friendly credentials, allowing users to wash a full load while using minimal resources.

This model boasts a spacious interior that can accommodate up to 10 place settings, making it suitable for small to medium-sized families. The adjustable upper rack is a notable feature, allowing users to customize the interior space to fit larger pots and pans without compromising other items.

Equipped with five washing programs, including Eco, Intensive, and Quick Wash, the ZSF 6120 offers versatility for different types of dishware and levels of soiling. The Eco program provides an energy-saving option, while the Intensive setting is designed for heavily soiled items, ensuring optimal cleaning results every time.

In addition to its washing capabilities, the appliance features a delay start option, allowing users to schedule their wash cycles up to 24 hours in advance. This is particularly useful for taking advantage of off-peak energy rates or ensuring that dishes are clean and ready when needed.

The ZSF 6120 is also designed with user convenience in mind. The intuitive control panel is easy to navigate, and the bright LED display provides clear information about the selected cycle and remaining time. Furthermore, the low noise level during operation, at just 49 dB, ensures that the dishwasher runs quietly in the background without disturbing household activities.

Safety is a priority in the ZSF 6120, which is equipped with features like a child lock to prevent accidental opening during operation. It also includes a flood protection system, which safeguards your home from potential water damage.

Overall, the Zanussi ZSF 6120 is a reliable and efficient dishwasher that combines modern technology with practical design. Whether you're looking for energy-saving features, versatility in washing options, or a quiet operation, this model delivers on all fronts, making it an excellent addition to any home.
Top Page Image Contents