Building-In, Building-in features | Zanussi ZT 415 instruction

BUILDING-IN

Building-in features

This dishwasher is designed to be fitted under a kitchen counter or sink.

In either case, it is essential that the recess dimensions

Mounting of decor panel onto the door

The height of the panel depends on the height of the plinth of adjacent kitchen units (see kitchen plinth adjustment).

indicated in the picture are followed.

No further openings for venting of the dishwasher are required, but only to let the water fill and drain hoses and power supply cable pass through.

446 max

148

The panel must be fitted with a handle, as the dish- washer handle will be hid- den by the panel.

446

⎟880

60mm

*	360	*	30

Drill the panel with a Ø 2x12 bit according to the dimensions indicated in the figure.

	878	820
	⎟	550
	818	550
	818	450
	II24

0 ⎟

II06

II27

Fix the cross bar onto the panel using four 3.5x16 screws provided. Reduce the length of fixing screws according to thickness of panel.

The recess height may be anywhere between 820 and 880 mm from the floor since the dishwasher incorporates levelling feet adjustable over a wide

If for aesthetic matching the panel is provided with a false drawer (fitted or carved on the panel itself), the two brackets provided should also be used.

range (max 60 mm).

Adjust the height of the appliance by turning these feet.

A distance of 2 mm should be allowed between the top of the dishwasher and the counter top.

Fitting under a counter (kitchen worktop or sink)

=	446 max	=
=	391,5	=
40		40
30		30
II26

Fix the brackets according to the measurements shown in the figure, by us- ing four 3.5 x 16 screws.

It is absolutely essential that the dishwasher is disconnected from the electricity supply before gaining access to any internal component.

Reduce the length of fixing screws according to thickness of panel.

Fit the dishwasher into the appropriate housing space and connect it. Make sure that the water fill and drain hoses and the power supply cable are not bent or kinked.

Fitting the panel onto the door

The door on this model is designed for the overlay of a panel having the following dimensions:

Width:	446	mm
Height:	644	to 714 mm max
Thickness:	20	mm max
Weight:	1.5	to 6 kg max

Note:

The panel height should not be more than what indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher plinth.

II12

II10

Mount the decor panel by inserting the two pivots of the cross-bar into the slotted holes of the door. Lift the decor panel until perfect alignment with the facia panel is obtained: if the two brackets have also been used, they will auto- matically enagage in the special holes provided on the dishwasher door.

Once the correct position has been found, open the door and fasten the decor panel on the lower section by means of the two long 4x40 screws provided, using the holes through the inner door (see fig.).

PII05GB

ZT 415 specifications

The Zanussi ZT 415 is a standout kitchen appliance that combines functionality, efficiency, and modern design, making it a popular choice among households seeking convenience in their cooking experiences. This built-in oven is crafted to enhance culinary creativity while providing reliable performance.

One of the main features of the Zanussi ZT 415 is its multifunctional cooking capabilities. It is designed with several cooking modes, including conventional heating, grilling, and fan-assisted cooking, allowing users to prepare a wide variety of dishes to perfection. The fan-assisted mode ensures even heat distribution, which is particularly beneficial for baking, ensuring that pastries and bread rise evenly and achieve that coveted golden crust.

The Zanussi ZT 415 is equipped with a large capacity interior. With substantial space, it can accommodate large roasts or multiple trays of baked goods simultaneously. This feature is especially advantageous for families or those who love to entertain, as it significantly reduces cooking time.

Another defining characteristic of the ZT 415 is its user-friendly interface. The control panel features an easy-to-read digital display and intuitive knobs, making it simple for users to adjust temperature settings and cooking times. This ease of use reduces the chances of errors, allowing even novice cooks to achieve professional results.

Energy efficiency is a significant aspect of the Zanussi ZT 415. It has been designed to meet stringent energy-saving standards, ensuring minimal impact on the environment while keeping utility bills manageable. The oven's A+ energy rating signifies its commitment to sustainability, making it an eco-friendly choice for modern kitchens.

Additionally, the self-cleaning function is a notable feature that appeals to busy individuals. This technology uses high temperatures to burn off food residues, simplifying the cleaning process and minimizing the need for harsh chemical cleaners.

In terms of design, the Zanussi ZT 415 boasts a sleek and contemporary finish, making it a stylish addition to any kitchen decor. Its compact size and built-in capabilities allow it to fit seamlessly into cabinetry, enhancing the kitchen’s overall aesthetic without compromising on space.

In summary, the Zanussi ZT 415 is a versatile built-in oven that combines essential cooking features with energy efficiency and modern design, making it an excellent choice for today's kitchen. Whether you are baking, roasting, or grilling, this oven offers the tools necessary for delightful home cooking experiences.