Zanussi ZSF 6160 manual Starting a washing programme, Setting and starting the programme

Page 14

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

6. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened.

Open the door carefully.

3.Close the dishwasher door

4.Press the On/Off push button

The On/Off indicator light illuminates.

5. Setting and starting the programme

To select a programme, press the push button of the programme you wish to select, the indicator light of the programme push button illuminates and in the digital display will appear, flashing, the running time (in minutes) of the programme that has been set .

The phase indicator lights foreseen for that programme will illuminate.

After about 3 seconds from the last pressure of a push button the programme starts automatically.

In the digital display the running time of the programme is no longer flashing and the indicator lights of the phases will turn off except for the phase underway.

Setting and starting the programme with "Care Plus" option

To select a programme, press the push button of the programme you wish to select, the indicator light of the programme push button illuminates and in the digital display will appear, flashing, the running time (in minutes) of the programme that has been set .

The phase indicator lights foreseen for that programme will illuminate.

Within 3 seconds press the option push button for "Care Plus". The indicator light of "Care Plus" push button illuminates.

With the selection of the "Care Plus" option the temperature in the last rinse phase will be held over 65°C for at least 10 minutes. Due to this, in the digital display the running time of the selected programme will be updated.

Pressing the "Care Plus" push button switches the function on or off. The indicator light of "Care Plus" push button shows the current setting.

"Care Plus"

Option activated

indicator light on

 

 

 

"Care Plus"

Option deactivated

indicator light off

(factory setting)

 

 

After about 3 seconds from the last pressure of a push button the programme starts automatically.

In the digital display the running time of the programme is no longer flashing and the indicator lights of the phases will turn off except for the phase underway.

Note: it is possible to select a washing programme also with the door slightly opened.

In this case the start of the programme will occur automatically after the closure of the door. Until this moment it is possible to change the setting made.

a)Press the On/Off push button.

b)Select a washing programme and if required the "Care Plus" option.

c)Close the door.

To interrupt a washing programme

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.

b)Press the On/Off push button (in this case all the indicator lights turn off). Press the On/Off push button again; the programme will start from the point in which it was interrupted.

To cancel a washing programme

To cancel a washing programme you have to reset the dishwasher; press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator light of the running programme starts flashing for about 2 seconds. After about 2 seconds all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled.

If a new washing programme will be selected, check that there is detergent in the detergent dispenser.

7. End of the washing programme

The dishwasher will automatically stop.

The end of programme indicator light is illuminated.

In the digital display appears 0 (remaining programme time), only in this case the programme has ended.

If the door is not immediately opened at the end of the programme, air will circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets.

This device operates intermittently for about 20 minutes, as long as the dishwasher is switched on.

If the On/Off push button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled.

Switch off the dishwasher by pressing the On/Off push button.

Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

8. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Dishwasher Contents Child safety Safety instructionsInstallation DisposalDigital display indicates Description of the applianceControl panel Page Water softener Prior to using for the first timeBSetting electronically Filling with salt To fillRinse aid Adjusting the doseAgain, the digital display indicates the new setting Filling with rinse aidLower basket Daily useLoading cutlery and dishes Are of limited suitabilityRemovable knife basket Cutlery basketUpper basket To move to the higher position proceed as follows Adjusting the height of the upper basketUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsWashing programmes Automatic washing programmeClose the dishwasher door Press the On/Off push button Setting and starting the programmeStarting a washing programme End of the washing programmeFrost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault Possible cause SolutionsDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentEuropean Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsLevelling Installation instructionsFitting under a counter Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Hints for test centres Cup racks position aPage From the Electrolux Group. The world’s No.1 choice

ZSF 6160 specifications

The Zanussi ZSF 6160 is a versatile and efficient dishwasher designed to meet the needs of modern households. Boasting a sleek, contemporary design, this model stands out for its reliable performance and advanced features. With a focus on user-friendliness and energy efficiency, the ZSF 6160 underscores Zanussi's commitment to quality and innovation in home appliances.

One of the standout features of the ZSF 6160 is its impressive capacity. It offers a spacious interior, comfortably accommodating up to 15 place settings, making it ideal for larger families or those who often entertain guests. This ensures that even the most substantial loads can be washed in one go, saving both time and water.

The dishwasher comes with several wash programs tailored to different needs. The Quick Wash program is particularly useful for those in a hurry, providing a thorough clean in just 30 minutes. For more heavily soiled items, the Intensive Mode delivers powerful cleaning action, while the Eco setting focuses on delivering effective washes with minimal energy consumption, showcasing Zanussi's commitment to sustainability.

In addition to its performance, the ZSF 6160 integrates several advanced technologies to enhance its efficiency and ease of use. The AirDry technology opens the dishwasher door automatically in the last moments of the cycle, allowing air to circulate and dry dishes naturally. This not only promotes better drying results but also reduces the need for energy-consuming drying functions.

The dishwasher is designed with user convenience in mind. It features an adjustable upper rack that can be raised or lowered to create more space for larger items. Furthermore, the simple control panel is intuitive and easy to navigate, making it accessible for all users.

Another important aspect of the ZSF 6160 is its quiet operation. With a noise level of just 47 dB, it runs quietly in the background, allowing users to enjoy their home environment without the distraction of loud appliance noise.

The Zanussi ZSF 6160 stands out as a reliable and efficient dishwasher, combining practicality with smart technology. Its thoughtful features, combined with the brand's reputation for quality, make it a compelling choice for anyone in need of an effective dishwashing solution. With the ZSF 6160, users can look forward to cleaner dishes, enhanced convenience, and lower energy consumption—all in one stylish package.
Top Page Image Contents