Zanussi ZSF 6160 manual Water outlet hose connection, Electrical connection

Page 21

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

CS18

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Control panelDigital display indicates Page Prior to using for the first time BSetting electronicallyWater softener To fill Filling with saltAgain, the digital display indicates the new setting Adjusting the doseRinse aid Filling with rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityCutlery basket Upper basketRemovable knife basket Use of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsAutomatic washing programme Washing programmesStarting a washing programme Setting and starting the programmeClose the dishwasher door Press the On/Off push button End of the washing programmeCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Cup racks position a Hints for test centresPage From the Electrolux Group. The world’s No.1 choice

ZSF 6160 specifications

The Zanussi ZSF 6160 is a versatile and efficient dishwasher designed to meet the needs of modern households. Boasting a sleek, contemporary design, this model stands out for its reliable performance and advanced features. With a focus on user-friendliness and energy efficiency, the ZSF 6160 underscores Zanussi's commitment to quality and innovation in home appliances.

One of the standout features of the ZSF 6160 is its impressive capacity. It offers a spacious interior, comfortably accommodating up to 15 place settings, making it ideal for larger families or those who often entertain guests. This ensures that even the most substantial loads can be washed in one go, saving both time and water.

The dishwasher comes with several wash programs tailored to different needs. The Quick Wash program is particularly useful for those in a hurry, providing a thorough clean in just 30 minutes. For more heavily soiled items, the Intensive Mode delivers powerful cleaning action, while the Eco setting focuses on delivering effective washes with minimal energy consumption, showcasing Zanussi's commitment to sustainability.

In addition to its performance, the ZSF 6160 integrates several advanced technologies to enhance its efficiency and ease of use. The AirDry technology opens the dishwasher door automatically in the last moments of the cycle, allowing air to circulate and dry dishes naturally. This not only promotes better drying results but also reduces the need for energy-consuming drying functions.

The dishwasher is designed with user convenience in mind. It features an adjustable upper rack that can be raised or lowered to create more space for larger items. Furthermore, the simple control panel is intuitive and easy to navigate, making it accessible for all users.

Another important aspect of the ZSF 6160 is its quiet operation. With a noise level of just 47 dB, it runs quietly in the background, allowing users to enjoy their home environment without the distraction of loud appliance noise.

The Zanussi ZSF 6160 stands out as a reliable and efficient dishwasher, combining practicality with smart technology. Its thoughtful features, combined with the brand's reputation for quality, make it a compelling choice for anyone in need of an effective dishwashing solution. With the ZSF 6160, users can look forward to cleaner dishes, enhanced convenience, and lower energy consumption—all in one stylish package.
Top Page Image Contents