Zanussi ZSF2450 manual Electrical connection, Drain hose

Page 16

If the water inlet hose is too short, replace the water inlet hose with an applicable, longer high- pressure hose. Do not connect an extension hose. To suit the installation, it is possible to turn the end of the hose that is connected to the dish- washer. Do these steps :

1. Loosen the retain- ing nut.

2. Turn the hose.

3. Tighten the retain- ing nut.

Connect the inlet hose to a water tap with an external thread of 3/4”.

Warning! Make sure that the retaining nut and all other connections are tight before

you move the dishwasher into position.

Warning! Always use a new water inlet hose. Do not use connection hoses from an old

appliance.

Drain hose

The appliance has water safety system to prevent water damage. If there is a malfunc-

tion, the drain pump automatically starts to drain the remaining water out of the dishwasher.

Warning! Only if the dishwasher is

connected to the mains socket, the water safety system operates when the dishwasher is off.

Two procedures are possible to install the water drain hose :

1

2

max. 75cm

1.Attach the plastic curve supplied at the end of the hose.

Put the water drain hose in the sink.

2.Connect the water drain hose to the water drain system.

The hose must be less than 75 cm above the bottom of the dishwasher to prevent in- correct operation of appliance.

If you connect the wa- ter drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot

Electrical connection

Warning! The manufacturer is not responsible if you do not follow these safety

precautions.

Ground the appliance according to safety precautions.

Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply. Always use a correctly installed shockproof socket.

Do not use multi-way plugs, connectors and extension cables. There is a risk of fire.

Do not replace the mains cable yourself. Contact the Service Force Centre.

Make sure that the mains plug is accessible after installation.

Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Dishwasher ZSF2450 Contents Safety informationInstallation Control panelDelay start button Setting modeWashing programmes Digital displayConsumption values Setting the water softener Electronic adjustmentUse of the appliance Water hardnessUse of dishwasher salt Use of rinse aidPress the on/off button to save the opera- tion Do these steps to fill the rinse aid dispenserAdjusting the dosage of rinse aid Loading cutlery and dishesHelpful hints and tips Rinse aid dial is set at the factory at posi- tionPrimary basket Use of detergentCutlery basket Setting and starting a washing programme Do these steps when the drying results are not satisfactoryCancelling a washing programme Use of detergent tabletsCare and cleaning Cleaning the spray arm External cleaningFrost precautions Long periods of non-operationFault code and malfunction Possible cause and solutionWhat to do if… Appliance does not start or stops during op- erationTechnical data Cleaning results are not satisfactoryInstallation Water connectionElectrical connection Two procedures are possible to install the water drain hoseDrain hose Page Page Page 156986160-00-012009

ZSF2450 specifications

The Zanussi ZSF2450 is a contemporary dishwasher that seamlessly combines efficiency with functionality, making it a popular choice for modern households. Known for its sleek design and innovative technologies, this model stands out in a crowded market of kitchen appliances.

One of the key features of the Zanussi ZSF2450 is its space-saving design. With a compact size, it fits comfortably in smaller kitchens while still offering generous interior space. This model can hold up to 10 place settings, allowing users to efficiently wash dishes, glasses, pots, and utensils without taking up too much room.

The ZSF2450 is equipped with various wash programs tailored to meet different cleaning needs. From intensive cycles for stubborn stains to eco-friendly options that conserve water and energy, this dishwasher offers versatility for any situation. The Quick Wash program is particularly noteworthy, enabling users to clean lightly soiled dishes in just 30 minutes, making it perfect for busy households.

Energy efficiency is a prominent characteristic of the Zanussi ZSF2450, as it boasts an impressive energy rating. This not only helps to minimize utility bills but also contributes to a more sustainable lifestyle, aligning with the growing demand for eco-conscious appliances. The machine is designed to use minimal water without compromising cleaning performance, giving users peace of mind.

In terms of technology, the Zanussi ZSF2450 features a user-friendly control panel with intuitive settings. Its large LED display simplifies program selection and monitoring, ensuring that users can operate the dishwasher with ease. Additionally, the Delay Start option allows users to set the dishwasher to run at a more convenient time, particularly useful for taking advantage of off-peak energy rates.

Noise levels are often a concern when choosing a dishwasher, and the ZSF2450 addresses this with its quiet operation. Engineered to minimize sound, it allows users to run the dishwasher at any time of day without disrupting household activities.

Lastly, the Zanussi ZSF2450 includes practical features such as adjustable shelves and a removable cutlery basket, enhancing organization and efficiency within the dishwasher. Overall, the Zanussi ZSF2450 stands out as a reliable, efficient, and user-friendly option for anyone in need of a modern dishwasher solution.
Top Page Image Contents