Zanussi ZSF2450 manual Use of the appliance, Setting the water softener, Electronic adjustment

Page 6

Programme

Programme duration

 

(in minutes)

 

1)

 

-

 

1) The digital display shows the programme duration.

The pressure and temperature of the water,

Energy consumption

Water consumption

(in kWh)

(in litres)

0,4

6,0

the variations of power supply and the quantity of dishes can change these values.

Use of the appliance

Refer to the following instructions for each step of procedure:

1.Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener.

2.Fill the salt container with dishwasher salt.

3.Fill the rinse aid dispenser with rinse aid.

4.Load cutlery and dishes into the dishwasher.

5.Set the correct washing programme for the type of load and soil.

6.Fill the detergent dispenser with the correct quantity of detergent.

7.Start the washing programme.

If you use detergent tablets, refer to the chapter 'Use of detergent'.

Setting the water softener

The water softener removes minerals and salts

• mmol/l (millimol per litre - international unit

from the water supply. Minerals and salts can

for the hardness of water).

 

have bad effect on the operation of the appli-

• Clarke.

 

 

ance.

 

 

Adjust the water softener in to the water hard-

Water hardness is measured in equivalent scales:

ness in your area. If necessary, contact your local

German degrees (dH°).

 

water authority.

 

French degrees (°TH).

 

 

 

 

 

 

Water hardness

 

Water hardness

Digital display

 

°dH

mmol/l

°TH

Clarke

setting

level

 

>24

>4.2

>40

> 28

5

 

 

18- 24

3.2- 4.2

32- 40

22- 28

4

 

 

12- 18

2.1- 3.2

19- 32

13- 22

3

 

 

4- 12

0.7- 2.1

7- 19

5 -13

2

 

 

< 4

< 0.7

< 7

< 5

11)

 

1) No use of salt required.

Electronic adjustment

The water softener is set at the factory at level 3.

1.Switch on the appliance.

2.Make sure that the appliance is in setting mode.

6

Image 6
Contents Dishwasher ZSF2450 Contents Safety informationInstallation Control panelWashing programmes Delay start buttonSetting mode Digital displayConsumption values Use of the appliance Setting the water softenerElectronic adjustment Water hardnessPress the on/off button to save the opera- tion Use of dishwasher saltUse of rinse aid Do these steps to fill the rinse aid dispenserHelpful hints and tips Adjusting the dosage of rinse aidLoading cutlery and dishes Rinse aid dial is set at the factory at posi- tionUse of detergent Primary basketCutlery basket Cancelling a washing programme Setting and starting a washing programmeDo these steps when the drying results are not satisfactory Use of detergent tabletsCare and cleaning Frost precautions Cleaning the spray armExternal cleaning Long periods of non-operationWhat to do if… Fault code and malfunctionPossible cause and solution Appliance does not start or stops during op- erationTechnical data Cleaning results are not satisfactoryInstallation Water connectionTwo procedures are possible to install the water drain hose Electrical connectionDrain hose Page Page Page 156986160-00-012009

ZSF2450 specifications

The Zanussi ZSF2450 is a contemporary dishwasher that seamlessly combines efficiency with functionality, making it a popular choice for modern households. Known for its sleek design and innovative technologies, this model stands out in a crowded market of kitchen appliances.

One of the key features of the Zanussi ZSF2450 is its space-saving design. With a compact size, it fits comfortably in smaller kitchens while still offering generous interior space. This model can hold up to 10 place settings, allowing users to efficiently wash dishes, glasses, pots, and utensils without taking up too much room.

The ZSF2450 is equipped with various wash programs tailored to meet different cleaning needs. From intensive cycles for stubborn stains to eco-friendly options that conserve water and energy, this dishwasher offers versatility for any situation. The Quick Wash program is particularly noteworthy, enabling users to clean lightly soiled dishes in just 30 minutes, making it perfect for busy households.

Energy efficiency is a prominent characteristic of the Zanussi ZSF2450, as it boasts an impressive energy rating. This not only helps to minimize utility bills but also contributes to a more sustainable lifestyle, aligning with the growing demand for eco-conscious appliances. The machine is designed to use minimal water without compromising cleaning performance, giving users peace of mind.

In terms of technology, the Zanussi ZSF2450 features a user-friendly control panel with intuitive settings. Its large LED display simplifies program selection and monitoring, ensuring that users can operate the dishwasher with ease. Additionally, the Delay Start option allows users to set the dishwasher to run at a more convenient time, particularly useful for taking advantage of off-peak energy rates.

Noise levels are often a concern when choosing a dishwasher, and the ZSF2450 addresses this with its quiet operation. Engineered to minimize sound, it allows users to run the dishwasher at any time of day without disrupting household activities.

Lastly, the Zanussi ZSF2450 includes practical features such as adjustable shelves and a removable cutlery basket, enhancing organization and efficiency within the dishwasher. Overall, the Zanussi ZSF2450 stands out as a reliable, efficient, and user-friendly option for anyone in need of a modern dishwasher solution.