REMOVING THE CURL BAR
When performing exercises that do not require the Curl Bar (17), pull the Curl Bar Pin (33) out of the Leg Lever (5) and remove the Curl Bar.
When attaching the Curl Bar (17), insert the Curl Bar Pin (33) completely through the Leg Lever (5).
5 |
17 |
33 |
ADJUSTING THE WEIGHT RESTS AND THE SAFETY SPOTTERS
To adjust the height of the Weight Rests (12), raise the Weight Rests to the desired height and tighten an Adjustment Knob (35) into each Upright (11).
Make sure that the Weight Rests are at the same height and that the Adjustment Knobs are fully tightened into the Uprights.
To adjust the position of the Safety Spotters (13), move the Safety Spotters to a different set of pegs on the Uprights (11). Make sure that the Safety
Spotters are at the same height.
12 | 35 |
|
|
| |
Pegs | 11 |
|
| 35 | |
13 |
| |
| 12 | |
| Pegs | 11 |
|
| |
|
| 13 |
12
