v i i . o p e r at i n g i n s t r u c t i o n s
K.KNEE ANGLE ADJUSTMENT
1.Engage wheel locks.
2.Press down on thumb activated levers at each side of the footbed hanger. Levers will not move easily until you have adequately supported the weight of the occupant's legs. (See Fig. 17)
3.Hold the levers and adjust knee angle.
4.Release the levers and allow the knee angle to lock into place as manual leg support is gently reduced.
L.SUNSHADE INSTALLATION AND ADJUSTMENT
Sunshade Installation
1.Loosen two thumbscrews located near the top of the back. They screw into black couplers on each side of the back.
2.Put the sunshade rod ends into the mounting holes, raise to or lower the sunshade to proper height, and tighten the thumbscrews.
Sunshade Adjustment
1.Once installed, adjust sunshade angle by pushing it forward or backward until desired position is obtained. (See Fig. 18)
2.Lift the front of the sunshade all the way up to swing it out of the way. (See Fig. 19
Figure 18
Figure 19
25
mkt3048 9921700000 Rev C
