![](/images/new-backgrounds/1285902/28590247x1.webp)
v i i . o p e r at i n g i n s t r u c t i o n s
H.TILT-IN-SPACE (TIS) ANGLE ADJUSTMENT
1.Engage wheel locks and move behind the child.
2.Support the shell with both hands and squeeze the TIS lever. It is on the right side of the shell handle.
(See Fig. 15)
3.Orient the seating system in an appropriate position while watching the child.
!WARNING
CAUTION, be careful to avoid pulling or crimping any life support tubing that may be attached to the child.
4.Release the TIS lever and move shell slightly to be sure that it locks into position.
I.HIP ANGLE ADJUSTMENT (for Karts without
|
|
recline) | Figure 15 |
1.Adjust the fixed hip angle by removing the screw that attaches the tube at the shell back bracket. Position the shell back to desired angle and
2.The lower mounting point is provided with a quick release pin to facilitate folding of the shell back.
J. RECLINE ADJUSTMENT (optional)
1.Engage wheel locks and move to the child's left side.
2.Squeeze the recline adjustment lever. It is attached to the left side of the shell handle. (See Fig. 16)
3.Move the back to an appropriate position while watching the child. Take care to avoid pulling or crimping any life support tubing that may be attached to the child.
4.Release the adjustment lever to lock recline.
Note: One or more adjustment limiting collars may |
|
be attached to the seating system to reduce the range |
|
of available hip angles. They attach to the mechani- |
|
cal lock shaft. Consult your supplier and therapist for |
|
adjustment needs. | Figure 16 |
|
24
9921700000 Rev C mkt3048