Pioneer DVH-P7050 owner manual Using subwoofer output, Adjusting subwoofer settings

Audio Adjustments

Using subwoofer output

This unit is equipped with a subwoofer output which can be switched on or off. When a sub- woofer is connected to the rear output, first, switch the rear output setting to subwoofer, then turn the subwoofer output on. For more details, see Setting the rear output and subwoofer controller on page 73.

1 Press A to select Sub-W1.

When the subwoofer controller setting is S.W Control:EXT, you cannot select Sub-W1. Press A until Sub-W1appears in the display.

•Pressing AUDIO on the head unit also per- forms the same operation.

2Press Eto turn subwoofer output on. Sub-W1 Normal appears in the display. Subwoofer output is now on.

• You can turn off subwoofer output by pressing e.

• Pressing 5or ∞on the head unit also per- forms the same operation.

3Press 1or ¡to select the phase of subwoofer output.

Press 1to select reverse phase and Rev. appears in the display. Press ¡to select nor- mal phase and Normal appears in the display.

• Pressing 2or 3on the head unit also per- forms the same operation.

Section

08

Adjusting subwoofer settings

When the subwoofer output is on, you can	English
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press A to select the Sub-W2.
When the subwoofer output is on, you can
select the Sub-W2. Press A until Sub-W2 80 (Hz)
appears in the display.	Español
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as 50 (Hz) or 125
(Hz).
• Pressing AUDIO on the head unit also per-
forms the same operation.	Deutsch
2 Press 1or ¡to select cut-off
frequency.
Press 1and 50 (Hz) is displayed. Press ¡
and 125 (Hz) is displayed. Only frequencies
lower than those in the selected range are out-
put from the subwoofer.
• Pressing 2or 3on the head unit also per-	Français
forms the same operation.
3 Press Eor eto adjust the output level
of the subwoofer.
Each press of Eor eincreases or decreases
the level of the subwoofer (e.g., +6 to –6).
Press Eor euntil you see the desired value	Italiano
displayed.
• Pressing 5or ∞on the head unit also per-
forms the same operation.

Nederlands

En 59