Pioneer DVH-P7050 Basic operation of CD, To skip back or forward to another track, press 4or ¢

Section

06Playing CDs on the built-in player

Basic operation of CD

1Press OPEN on the head unit to open the front panel.

Disc loading slot appears.

• After inserting a CD, press SOURCE to select the built-in player.

• Pressing SOURCE on the head unit also per- forms the same operation.

2Insert a CD into the Disc loading slot. When you set AUTO PLAY :ON, playback will automatically start. If you set AUTO PLAY :OFF, press SOURCE to select DVD (refer to page 17).

Disc loading slot

EJECT button

•You can eject a CD by pressing EJECT on the head unit.

•To avoid a malfunction, make sure that no metal object comes into contact with the front panel is open.

3After a CD has been inserted, close the front panel.

4Use VOLUME to adjust the sound level. Press VOLUME to increase or decrease the vol- ume level.

• Rotating VOLUME on the head unit also increases or decreases the volume.

5To skip back or forward to another track, press 4or ¢.

Track numbers are displayed for 8 seconds.

• Pressing 2or 3on the head unit also per- forms the same operation.

•If the remote control is set to DVH mode, 4and ¢do not operate. In this case, press 1or ¡to skip to another track.

6To perform fast forward or reverse, press and hold 1or ¡.

• Pressing and holding 2or 3on the head unit also performs the same operation.

•If you continue pressing 1or ¡for 5 seconds, the color of the fast reverse/fast

forward mark ( / ) changes from white to blue. When this happens, fast reverse/fast forward continues even if you release 1or ¡. To resume playback at a desired point, press 6.

•If you fast forward to the end of a CD, fast forward continues from the beginning of the disc.

•If you fast reverse to the beginning of a CD, normal playback resumes.

Notes

•The built-in player plays one, standard,

12-cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs.

•Do not insert anything other than a DVD/Video CD/CD into the Disc loading slot.

•If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again.

•If the built-in player does not operate properly, an error message such as ERROR-11may be displayed. Refer to Error messages on page 85.

40En