Initial Settings
2Select AUX on or off with Eor e. Pressing Eor ewill switch AUX between on and off and that status will be displayed (e.g.,
AUX :ON).
•Pressing 5or ∞on the head unit also per- forms the same operation. 
Switching the dimmer setting
To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can switch dimmer on or off.
1 Press F to select DIM.
Press F repeatedly until Dimmer appears in the display.
•Pressing FUNCTION on the head unit also performs the same operation.
2Select DIM on or off with Eor e. Pressing Eor ewill switch Dimmer between on and off and that status will be displayed (e.g.,
Dimmer :ON).
•Pressing 5or ∞on the head unit also per- forms the same operation. 
Selecting the brightness
You can select the display brightness. Initially this mode is set to 12.
1 Press F to select BRIGHT.
Press F repeatedly until Brightness appears in the display.
•Pressing FUNCTION on the head unit also performs the same operation.
Section
10
2 Select the desired brightness with |
| |
Eor e. | English | |
• The display shows 0 – 15. | ||
| ||
• Pressing 5or ∞on the head unit also per- |
| |
forms the same operation. |
|
Setting the rear output and sub- | Español | |
This unit’s rear output (rear speaker leads out- | ||
woofer controller |
| |
put) can be used for |
| |
SP:FULL) or subwoofer (Rear SP:S.W) connec- |
| |
tion. If you switch rear output setting to the Rear |
| |
SP:S.W, you can connect a rear speaker lead | Deutsch | |
directly to a subwoofer without using an auxil- | ||
| ||
iary amp. |
| |
Initially, the unit is set for rear |
| |
connection (Rear SP:FULL). |
| |
When rear output are connected to full range |
| |
speakers (when Rear SP:FULL is selected), you |
| |
can connect the RCA subwoofer output to a | Français | |
subwoofer. In this case, you can select whether | ||
| ||
to use the subwoofer controller’s (low pass |
| |
filter, phase) |
| |
auxiliary S.W Control:EXT. |
| |
Notes |
| |
• Even if you change this setting, there is no | Italiano | |
output unless you switch the non fading out- | ||
| ||
put (refer to page 60) or subwoofer output |
| |
(refer to page 59) in the audio menu on. |
| |
• If you change the subwoofer controller, sub- |
| |
woofer output and non fading output in the |
| |
audio menu return to the factory settings. |
| |
• Both rear speaker leads output and RCA rear | Nederlands | |
output are switched simultaneously in this | ||
| ||
setting mode. |
|
En 73
