![](/images/new-backgrounds/1289235/289235135x1.webp)
Section
09Initial Settings for DVD player
3Move the joystick up/down to select angle mark display ON/OFF.
The currently set option is indicated the mark “ ”. The option selected with the joystick is indicated in blue.
4Click the joystick.
Angle mark display is set ON/OFF.
Notes
•You can also switch the angle during playback with ANGLE. (Refer to page 27.)
•Pressing RETURN takes you back to the previ- ous display.
Setting for digital output
(DIGITAL OUTPUT)
Set digital output correctly to match the compo- nents you are using with this unit. There is no need to change settings if this unit is not con- nected for digital output.
Precaution
•Incorrect setting may result in noise and dam- age to speakers so be sure to read the manu- als of the connected components.
1Move the joystick up/down to select
DIGITAL OUTPUT in the second SET UP MENU.
DIGITAL OUTPUT is indicated in blue.
2Click the joystick.
Digital output setting menu is displayed.
3Move the joystick up/down to select the desired digital output setting.
The currently set digital output setting is indi- cated the mark “ ”. The digital output setting selected with the joystick is indicated in blue.
Digital output | Setting detail |
|
|
Dolby D/LPCM | Select when using a Dolby |
| Digital compatible amp and |
| decoder. The Dolby Digital |
| signal is output as it is. (Initial |
| setting) |
|
|
LPCM | Select when using an amp and |
| decoder that are not Dolby |
| Digital compatible. The Dolby |
| Digital signal is converted to |
| and output as a linear PCM |
| signal. |
|
|
4 Click the joystick.
The selected digital output setting is set.
Notes
•Linear PCM output of DTS audio is not possi- ble. If you select LPCM, DTS audio is not out- put.
•When using this unit with a Pioneer Multi- channel processor with digital input (DEQ- P7050), select Dolby D/LPCM.
•Pressing RETURN takes you back to the previ- ous display.
68En