Specifying track DVD mode | Pioneer DVH-P7050 guide

Section

05Playing Video CDs on the built-in player

7To perform fast forward or reverse, press and hold 1or ¡.

• Pressing and holding 2or 3on the head unit also performs the same operation.

•If you continue pressing 1or ¡for 5 seconds, the color of the fast reverse/fast

forward mark ( / ) changes from white to blue. When this happens, fast reverse/fast forward continues even if you release 1or ¡. To resume playback at a desired point, press 6.

•Fast forward/fast reverse may not be possi- ble at certain locations on some discs. If this happens, normal playback automati- cally resumes.

Notes

•The built-in player plays one, standard,

12-cm or 8-cm (single) Video CD at a time. Do not use an adapter when playing 8-cm Video CDs.

•Do not insert anything other than a DVD/Video CD/CD into the disc loading slot.

•If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again.

•If the built-in player does not operate properly, an error message such as ERROR-11may be displayed. Refer to Error messages on page 85.

Stopping playback

•This function is operated by using the remote control.

Press 7.

Note

•When you stop Video CD playback (during PBC playback only) by pressing 7, that loca- tion on the disc is memorized enabling play- back from that point when you play the disc again.