v i i . o p e r at i n g i n s t r u c t i o n s
A.WHEEL LOCK Adjustment
1.Loosen bolts and adjust wheel lock contact bar downwards. Lock arms should embed into tires minimum of 1/8th inch when locked.
2.With the wheel locks on the rear wheels should skid, not roll when the Kid Kart is pushed with a child in the product.
Wheel Lock
Adjustment
Bolts
Wheel Lock Adjustment | Figure 1 (Unlocked) | Figure 2 (Locked) |
B.UNFOLDING
1.Unhook fold retaining strap and store in tray provided under seating shell.
2.Insert or rotate
3.Place the mobility base on the floor with wheel locks engaged. Make sure that the mobility base fold lock out pin is not inserted into the lock out hole. (See Fig. 4)
4.Lift the handle bar over into locked position, then lift up so that the frame unfolds and locks into an upright position. (See Fig. 5 and 6)
5.Insert the mobility base lock pin into the lockout hole. When inserted into the hole, the lock pin prevents the rear wheels and axle from folding under the Kart.
Before seating a child always check that the mobility base is properly locked in its upright position, that the fold lockout pin is inserted, and that the wheel locks are engaged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Figure 4 |
|
| Figure 5 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 18 |
|
|
|
|
9921700000 Rev C mkt3048
