v i i i . m a i n t e n a n c e

1.Spray tilt in space control plunger with Teflon-based lubricant every six months to ensure continued smooth operation. The spray can be purchased at most bike shops and hardware stores.

2.At least every four months, check all screws and knobs for tightness. If parts are missing, broken, damaged or won, then stop use of the product until repairs are made, using factory-authorized parts.

3.Wipe down all plastic components periodically with disinfectant solution to maintain cleanliness.

4.Hand wash and air-dry the fabric components as needed.

5.Check tire pressure once a week. Refer to the pressure recommendations printed on the tire side wall (typically 35 psi).

6.Lubricate all moving components with Teflon lubricant only.

caution

Use of any other types of lubricant tend to foul moving components and may void warranty.

7.Check the wheel locks for proper operation. Rear wheels should skid rather than roll when pushed with a child in the product.

8.If the release lever is not returning to its locked position or if the locking mechanisms are not catching and locking the rear axil for transport, inspect them for any build up of dirt or grit. If dirt is present, the parts may be washed with warm soapy water, dried thoroughly and then relubricated with a teflon based lubricant from a bike shop or hardware store. Always check to assure this procedure corrected the problem. If there is not a build up of dirt or grit, the lubricant will help mechanisms function smoothly.

40

9921700000 Rev C mkt3048

Page 40
Image 40
Sunrise Medical Xpress instruction manual I i . m a i n t e n a n c e