Dealer Motor Assembly Replacement Instructions

!WARNING

Electrical Shock Hazard.

Can cause injury or death.

Disconnect all electrical power supplies before servicing.

Do no operate equipment without access panels in place

Do not use this fan with any solid-state speed control device

!CAUTION

Risk of Sharp Edges Hazard.

Equipment sharp edges can cause injuries.

Avoid grasping equipment edges without protective gloves.

1. Accessing the motor assembly

a.Turn the unit off and unplug it from any electrical source before opening the cabinet.

b.Remove the safety screw(s) from the motor section access panel.

c.Lift the door up by the finger tabs and pull out to remove it from the unit.

2. Removing the old motor assembly

a.Disconnect all four motor wires from switch, ground post and capacitor.

b.Disconnect the two white wires from the capacitor.

c.Separate the motor from the motor mount by removing the four screws found in figure 13.

d.Slide the motor out from under the motor mount to remove it from the unit.

3. Installing the new motor assembly

a.Slide the new motor into the motor mount making sure that the wires go through the smaller hole off- set from the center of the bracket.

b.Secure the new motor to the motor mount with the four screws removed in step 2c.

d.Connect the wires as follows:

-Blue wire from motor to the on/off switch.

-Yellow/green wire from motor to the ground post.

-Brown wire from the motor to a capacitor post.

-Black wire from the motor to the other capacitor post.

-White wire from the on/off switch to the capacitor via the black wire piggyback post.

-White wire from the power cord to the capacitor via the other white wire’s piggyback post.

4. Closing the unit

a.Replace the motor section access panel and secure it with the eight screws removed in step 1b.

b.Plug the unit into it’s electrical source and turn it on.

Figure 19.

Electrical Diagram

Figure 20.

15

Page 14 Page 16
Page 15
Image 15
Americair 8500 & 10000, 4000HV, 2500HV, 6000V, 6500 warranty Dealer Motor Assembly Replacement Instructions, Electrical Diagram
Page 14 Page 16

2500HV, 6000V, 8500 & 10000, 6500, 4000HV specifications

The Americair series, including the models 4000V, 8500, 10000, 6500, and 5000V, represents a significant advancement in air purification technology. Designed for commercial and industrial applications, these units are engineered to enhance indoor air quality while ensuring maximum efficiency and user convenience.

One of the standout features across these models is the use of advanced HEPA filtration system. HEPA filters are designed to capture at least 99.97% of airborne particles, including dust, pollen, smoke, and other allergens, down to 0.3 microns in size. This capability is crucial for environments that demand stringent air quality standards, such as hospitals, schools, and offices.

The Americair 4000V model is tailored for smaller spaces, yet it packs a powerful punch with a CADR (Clean Air Delivery Rate) that ensures rapid air cleaning. It's particularly suited for rooms up to 400 square feet, making it ideal for small businesses and home offices. The user-friendly interface allows for easy adjustments, and the lightweight design ensures portability.

Moving up in capacity, the Americair 5000V and 6500 models cater to medium-sized rooms, providing enhanced CADR levels. These units incorporate smart technology, allowing for app connectivity, enabling users to monitor air quality in real time and receive notifications for filter changes.

The Americair 8500 and 10000 models are designed for larger spaces such as auditoriums and open-plan offices. With high-performance motors and multi-stage filtration systems, these models not only purify the air but also circulate it efficiently. Additionally, they come equipped with UV-C light technology, which works to eliminate germs and bacteria, enhancing health safety in populated areas.

All models feature energy-efficient designs, ensuring they consume less power while maintaining high performance levels. Noise reduction technology is also integrated, making these units operate quietly, an essential factor for environments requiring minimal disruption.

In conclusion, the Americair series stands out with its combination of powerful filtration, energy efficiency, and user-friendly technology. Whether for a small office or a large industrial space, these models provide versatile solutions for improving indoor air quality, promoting a healthier environment for all.
Top Page Image Contents