Sunrise Medical Xpress instruction manual Positioning Shell Removal

v i i . o p e r at i n g i n s t r u c t i o n s

Unfold the mobility base and be sure that the wheel locks are engaged.

1.Place the shell over the top of the mobility base, and squeeze the tilt-in-space (TIS) lever attached to the right side of the shell handle. (See Fig.14 page 24)

2.Align the tilt-in-space guide pins and pivot posts with the mobility base pivot slots and lower the shell into place.

3.Adjust legrest, tilt and optional recline to appropriate configuration.

G. POSITIONING SHELL REMOVAL

1.Engage wheel locks. Remove child from Kart. The push handle must be in its normal use position to remove the shell.

2.Squeeze and hold the TIS lever. (See Fig.14 page 24)

3.Lift the shell vertically from the mobility base.

Pivot

Slot

Pivot Post

Guide Pin

Figure 14

23

mkt3048 9921700000 Rev C