Introduction
The Sima speaker selector series has been designed to let you add speakers around your home or office while maintaining a central control. Turn them on and off and adjust the volume without requiring additional amplifiers.
The Sima speaker selectors have the following features:
• Small size to fit with any system
•Ability to add up to 4
•Left and right “commons” are isolated to work with all types of amplifiers
•Protection for amplifier.
•No power required for operation
•Easy installation
•Can handle up to 100 watts amplifier power.
Front Panel
Figure 1, Front Panel (SSW-L6 EX shown)
Controls
1.Speakers on/off - Press button in to turn on all speaker pairs. Press again (button out) to turn off.
2.Amplifier selector – Press button in to select amp A. Press again (button out) to select amp B
3.Volume control – An
Rear Panel
Figure 2, Rear Panel (SSW-L6 EX shown)
4.4. Speaker Connections - Connect your speakers to these terminals
5.5. Amplifier Connections – connect the speaker output of your receiver or amplifier (100 watts max). Amplifier B optional
Note: Be sure to align the pins on the terminals with the removable connector blocks correctly. Do not shift over 1 pin.