Zanussi ZDI 6896 SX manual Starting a washing programme

Page 15

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

4.Press the On/Off button

8. To cancel a wash programme in progress

Press cancel button.

The message CONFIRM CANCEL? appears in the display.

Press the confirm/start button.

The dishwasher returns to setting mode and the message CHOOSE PROGRAMME is displayed.

(If a new washing programme will be selected, check that there is detergent in the detergent dispenser).

Attention! Hot steam may escape when the door is

opened. Open the door carefully.

5.Setting and starting the programme

a)Press the programme selection button until the name of the desired programme is displayed (see "Washing programmes" chart for the selection of the washing programme). The details concerning the set programme (programme name, duration, etc...) are displayed.

Select options and/or "delay start", if required.

Press the confirm/start button, the set programme will start automatically.

If refilling with salt and/or rinse aid had been postponed or if the salt has not yet dissolved completely, salt and rinse aid refilling messages will appear in the display. In this case it is necessary to press the confirm/start button twice to start the wash programme.

b)If "delay start" has been set, the countdown will start automatically and will decrease with steps of 1 hour. Only in the last hour the decrease will occur from minute to minute.

The number of hours before the start of the wash programme and the delay start symbol is flashing in the display.

Opening the door will not modify or interrupt the countdown. Once the delay start has elapsed the programme will start automatically.

6.To interrupt a wash programme in progress

Interrupt a wash programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

a)Open the dishwasher’s door; the programme will stop. The message PLEASE CLOSE DOOR is displayed. Close the door; the programme will start from the point at which it was interrupted.

b)Press the On/Off button, in this case all the indicator lights turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted.

9. End of washing programme

The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.

If the door is not immediately opened at the end of the programme, air will circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets.

This device operates intermittently for about 20 minutes, as long as the dishwasher is switched on. If the On/Off button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled.

The message PROGRAMME END alternated with PLEASE SWITCH OFF is displayed.

In case refilling with salt and/or rinse aid is necessary, the message PLEASE SWITCH OFF is replaced with the salt and rinse aid refilling messages. If refilling is postponed, it is possible, however, to switch off the appliance.

Switch off the dishwasher by pressing the On/Off button.

Open the door, leave it ajar and wait a few minutes before removing the dishes: in this way they will be cooler and the drying will be improved.

10. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

7. To cancel a delay start in progress

Press cancel button.

The message CONFIRM CANCEL? appears in the display.

Press the confirm/start button.

The wash programme will start automatically.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Control panelConfirm/start button is necessary to Menu Submenu English flashes First useWater softener Prior to using for the first timeTo fill Filling with dishwasher saltFilling with rinse aid Adjusting the doseFactory setting rinse aid dispenser activated Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketFill with detergent Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Starting a washing programme Prolonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsWhat to do, when Alarm messages or codes are displayedFault code / message Possible cause Solutions Fault Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard guarantee conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresFrom the Electrolux Group. The World’s No.1 choice

ZDI 6896 SX specifications

The Zanussi ZDI 6896 SX is a sophisticated built-in dishwasher that combines efficiency, convenience, and modern design, making it a valuable addition to any kitchen. This model stands out with its sleek stainless steel finish and contemporary styling that fits seamlessly into a variety of kitchen decors.

One of the primary features of the ZDI 6896 SX is its impressive capacity. With a place settings capacity of up to 15, this dishwasher is ideal for large families or those who frequently host gatherings. Its flexible interior design includes adjustable racks and folding tines, allowing users to customize the space according to their load, accommodating everything from delicate glassware to bulky pots and pans.

The ZDI 6896 SX is designed with advanced technology, emphasizing energy efficiency with an A++ energy rating. This translates to lower energy consumption and reduced utility bills, which is essential for environmentally-conscious consumers. Furthermore, it operates quietly thanks to an efficient motor, making it an excellent choice for open-plan living spaces where noise levels are a concern.

In terms of performance, this dishwasher features multiple wash programs tailored to different types of loads. The Quick Wash option is perfect for busy schedules, giving you sparkling clean dishes in just 30 minutes. The Eco program is designed to save water and energy while delivering effective cleaning results, making it an excellent choice for everyday use. Additionally, the Intensive program is ideal for heavily soiled cookware, ensuring thorough cleaning for the toughest of stains.

Safety is also a priority in the design of the ZDI 6896 SX. It includes child lock features to prevent accidental operation, as well as overflow protection to guard against water leaks. The machine is equipped with a delay start feature, allowing users to set the dishwasher to operate at a more convenient time.

Overall, the Zanussi ZDI 6896 SX combines advanced technology, extensive capacity, and user-friendly features, making it a top choice for any modern household. Whether you’re dealing with everyday dishes or post-party cleanups, this appliance promises to deliver exceptional cleaning performance while fitting seamlessly into your kitchen aesthetic. With the ZDI 6896 SX, you can enjoy the comfort of a fully equipped, efficient dishwashing solution.
Top Page Image Contents