Elmo TSE272X Precautions For Use And Installation, Specification, Model, TSE270X, TSE271X

PRECAUTIONS FOR USE AND INSTALLATION

*Never aim the camera at the sun.

Never aim or point the camera at the sun even if you are not shooting.

*Do not shoot intense light.

Strong light such as a spot light on the image plane will cause blooming or smear. When strong light comes into the image plane, vertical stripes may appear on it. However, this does not mean that the camera is defect.

*Take precautions when handling a camera.

Do not drop your camera, or give it a strong shook or vibration. This may cause camera to malfunction.

*Do not touch internal parts.

Be sure not to touch the internal parts. This may cause to electrical shock.

*Do not let the camera get wet.

Install the camera at the place where it will not get wet. Should it gets wet, turn off the power immediately and contact your dealer.

*Install your camera where no video noise appears.

When camera cables have been laid near electric wires or television receivers, a noise may interfere the image.

If noise occurs, relocate cables or reinstall equipment.

*Check the ambient temperature and humidity.

Avoid using camera in areas where temperature is consistently hotter or colder than the specified range (See Specifications chart below) or poor image quality or damaged parts may occur.

Precautions should also be taken to avoid areas of high humidity.

*Should you notice any trouble.

If any trouble occurs while you are using the camera, turn off the camera and contact your dealer. Failure to do so may cause damage to the camera.

*The socket-outlet should be installed near the equipment and should be easily accessible.

SPECIFICATION

Model	TSE270X	TSE271X	TSE272X
Power source	AC24V ± 10% 60Hz ± 1Hz	DC12V (DC11V-16V)	AC120V ± 10% 60Hz ± 1Hz
Power consumption	Approx.6W	Approx.3.2W	Approx.6W
Pick-up device	1/3" Black & White interline-transfer CCD
Effective picture element	512 (H) X 492 (V)
Scanning area	4.92mm (H) X 3.69mm (V)
Scanning system	2:1 interlaced
Scanning frequency(H)(V)	15.75Hz 60Hz	15.734Hz 59.94Hz	15.75Hz 60Hz
Sync. system	Line-lock	Internal	Line-lock
Resolution	380TV lines (Horizontal) 350TV lines (Vertical)
S/N ratio	More than 46dB
Recommended illumination	22 lx (F1.2 under incandescent lamp)
AGC	Built into camera circuitry
Sens-up	Provided (Factory-set at OFF)
Backlight control	Provided (Factory-set at OFF)
AES	Provided (Factory-set at OFF)
(Automatic Electronic Shutter)
Gamma correction	0.45
Accumulation node	Field
Output signal	VBS 1.0 Vp-p, 75Ω, EIA, compatible
Auto-iris terminal	4P (DC/Video)
Power terminal	3P terminal	2P terminal	Power cord
Lens mount	CS
Ambient temperature	-10°C ~ +50°C (14°F~122°F)
Ambient humidity	30% ~ 90%
Dimensions	60(W) X 60(H) X 120(D)mm (2.4 X 2.4 X 4.9 inches)
Weight	510 grm (1.13 lbs)	320 grm (0.71 lbs)	600 grm (1.32 lbs)

Note: Weight and dimensions are approximate.

Design and specifications are subject to change without prior notice.

- 2 -