Zanussi ZDI 6896 SX Installation instructions, Building-in, Levelling, Water supply connections

Page 21

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

21

Image 21
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Control panelConfirm/start button is necessary to Menu Submenu English flashes First useWater softener Prior to using for the first timeTo fill Filling with dishwasher saltFactory setting rinse aid dispenser activated Adjusting the doseRinse aid Filling with rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityUpper basket Cutlery basketUse of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes Starting a washing programme Cleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationFault code / message Possible cause Solutions Alarm messages or codes are displayedFault Possible cause Solutions What to do, whenWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard guarantee conditions Guarantee ConditionsEuropean Guarantee ExclusionsBuilding-in Installation instructionsLevelling Fixing to the adjacent unitsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsCup racks position a Hints for test centresFrom the Electrolux Group. The World’s No.1 choice

ZDI 6896 SX specifications

The Zanussi ZDI 6896 SX is a sophisticated built-in dishwasher that combines efficiency, convenience, and modern design, making it a valuable addition to any kitchen. This model stands out with its sleek stainless steel finish and contemporary styling that fits seamlessly into a variety of kitchen decors.

One of the primary features of the ZDI 6896 SX is its impressive capacity. With a place settings capacity of up to 15, this dishwasher is ideal for large families or those who frequently host gatherings. Its flexible interior design includes adjustable racks and folding tines, allowing users to customize the space according to their load, accommodating everything from delicate glassware to bulky pots and pans.

The ZDI 6896 SX is designed with advanced technology, emphasizing energy efficiency with an A++ energy rating. This translates to lower energy consumption and reduced utility bills, which is essential for environmentally-conscious consumers. Furthermore, it operates quietly thanks to an efficient motor, making it an excellent choice for open-plan living spaces where noise levels are a concern.

In terms of performance, this dishwasher features multiple wash programs tailored to different types of loads. The Quick Wash option is perfect for busy schedules, giving you sparkling clean dishes in just 30 minutes. The Eco program is designed to save water and energy while delivering effective cleaning results, making it an excellent choice for everyday use. Additionally, the Intensive program is ideal for heavily soiled cookware, ensuring thorough cleaning for the toughest of stains.

Safety is also a priority in the design of the ZDI 6896 SX. It includes child lock features to prevent accidental operation, as well as overflow protection to guard against water leaks. The machine is equipped with a delay start feature, allowing users to set the dishwasher to operate at a more convenient time.

Overall, the Zanussi ZDI 6896 SX combines advanced technology, extensive capacity, and user-friendly features, making it a top choice for any modern household. Whether you’re dealing with everyday dishes or post-party cleanups, this appliance promises to deliver exceptional cleaning performance while fitting seamlessly into your kitchen aesthetic. With the ZDI 6896 SX, you can enjoy the comfort of a fully equipped, efficient dishwashing solution.