Automax
AUTOMAX supplies the zone with full heat for a specific period, and then adjusts down to the setting you have chosen.
λTurn the control button clockwise to “A”, then select the required setting.
The display alternates between A and the setting chosen. The period for which AUTOMAX is connected depends on the setting chosen.
Connection of child safety device on zones
λTurn the 2 single
0 | S | 0 | 0 | S |
|
|
| ||
| A | A |
| A |
FO 2528 |
|
|
|
|
The display will show:
FO 2530
When you turn on a zone the display will show:
FO 2530
You can disconnect the child safety device as follows:
λTurn all the cooking zone control buttons to 0.
λTurn the 2 single
The light under the “key” symbol in the display will disappear. The zones can now be used.
CHEC control: Autostop
If you forget to turn a cooking zone off after use, it will be disconnected automatically after a specific period of time. The higher the setting, the shorter the time before the zone is disconnected.
Setting AUTOSTOP
16 hours
26 hours
35 hours
45 hours
54 hours
61½ hours
71½ hours
81½ hours
91½ hours
When the autostop function is activated the display will show:
FO 2527
The zones cannot be used.
To activate the cooking zones:
λTurn all the control buttons to 0. The zones can now be used.
Residual heat indicator
When you switch off a zone, an “H” in the display indicates that the zone is still hot. The residual heat indicator will continue to be illuminated until the zone reaches a temperature of approx. 50°C.
FO 2526
7