Zanussi ZKT 652 DX operating instructions Problem Possible cause Remedy

Problem	Possible cause	Remedy
Display is switching be-	Power management is	See the section
tween two heat settings	reducing the power of	“Switching the power
	this cooking zone	function on and off”
is lit	Unsuitable cookware	Use suitable cookware
	No cookware on the	Put cookware on zone
	cooking zone
	Diameter of the base of	Move to smaller cook-
	the cookware is too	ing zone
	small for the cooking
		Use suitable cookware
	zone
is lit	Overheating protection	Switch off the cooking
	for the cooking zone	zone. Switch the cook-
	has been triggered	ing zone on again
	Safety cut-out has	Switch off the cooking
	been triggered	zone. Switch the cook-
		ing zone on again
and number are dis-	Electronics fault	Disconnect the appli-
played		ance from the electrical
		supply for a few min-
		utes (Take the fuse out
		of the house’s wiring
		system)
		If after switching on
		again, is displayed
		again, call the customer
		service department

If you are unable to remedy the problem by following the above sug- gestions, please contact your local Service Force Centre.

1 Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improp- er repairs.

3 If the appliance has been operated incorrectly, the visit from the service technician or dealer may not take place free of charge, even during the war- ranty period.

44