Specifications

STEREO VITALIZER Rear Panel

Version 1 (Model 9319, unbalanced jack-version, until autumn 1995)

-unbalanced input & output stages (0 dB)

-mono-1/4inch-jacks

-2-wire power cord

-relais-hard-bypass

Version 2 (Model 9320, unbal. jacks & bal. XLR-Version)

-balanced (+6 dB) & unbalanced (0 dB) input & output stages

-NC3 XLR-connectors and mono-1/4inch-jacks

-voltage selector: 220-240 V/50 Hz or 100-120 V/60 Hz

-detachable 3-wire, U-ground power cord

-GND-Lift switch

-relais-hard-bypass

Frequency bandwidth	10 Hz - 100 kHz (100 kHz = -3dB)
Equalizer frequency range	15 Hz - 22 kHz
CMRR (common mode rejection)	-85dBu at 100 Hz
	-76dBu at 1 kHz
	-65dBu at 15 kHz
THD & N
(total harmonic distortion & noise)	0,002% at 1 kHz
	0,105% at 10kHz
Signal to noise - CCIR 468
	Bypass:	-96dBu
	In/Effekt min:	-78dBu
Input & output stages
XLR: instrumentation amplifier, electronically balanced
(differential) transformerless
nominal input level	+6 dB
Jack: unbalanced
nominal input level	0 dB

Model 9320	Version	Model 9319	Version
	2		1

Input impedan ce (XLR, jack) Output impedance (XLR) Output impedance (jack)

=20 kOhm

=75 Ohm < 600 Ohm

LOW (0dB) / HIGH (+8dB)

illuminate 3dB before clipping

Standard EIA 19"/1U unit, 482 x 44 x 237mm Model 9319: 2,7kg Model 9320: 3,0kg

16	S T E R E O