Sound Performance Lab 9320, 9319 owner manual Tape Duplication, Broadcast

In the field of electronic music, the STEREO VITALIZER can be used to add new range and depth to samplers and synthesizers and also to further process existing effects such as delay and reverberation. Even budget instruments and processors with limited audio bandwidths can be made sound full-bodied and detailed.

If you want to use a compressor in the master chain after the console, use your STEREO VITALIZER after the compressor. You can then be sure that the STEREO VITALIZER will receive a level-corrected signal which helps him to even operate more precise. If you use the STEREO VITALIZER before the compressor negative side-effects such as pumping even could be emphasized.

Tape duplication is often made at high speed resulting in a deterioration of the high frequency spectrum of the copies. By processing the output from the source machine, additional brightness can be added to compen- sate for deficiencies in the copying system. It may also be necessary to modify the bass end as many high speed systems fail to reproduce the bass end of the spectrum faithfully. In both areas, the STEREO VITALIZER is both effective and simple to set up.

Real-time duplication is getting more and more popular. In that applica- tion the STEREO VITALIZER offers the same advantages as described under »Studio« and »Video & Film Post Production«.

Application 3:

The STEREO VITALIZER inserted

between Compressor und

Recorder.

Tape -

Duplication

The STEREO VITALIZER is perfectly suited to the production of radio jingles, commercials and station idents. Because of the psychoacoustic nature of the processing, the treated signal will appear louder, closer, brighter and more intelligible than whatever was played immediately beforehand, thus creating a powerful impact.

In commercial radio, the STEREO VITALIZER can be used to process the entire on-air signal helping the radio station stand out from the competi- tion. The integral surround processor can also be used to create a wider stereo spread which is important when most of the audience are listening on systems with a narrow speaker geometry such as is the case with in-car sound and portable stereo music systems.

Broadcast

S T E R E O 7