Zanussi ZUT 125W manual Something Not Working, Problem Possible Cause Solution

Page 11

Something Not Working

If the appliance is not working correctly, please carry out the following checks before contacting your local Zanussi Service Force Centre.

Problem

Possible Cause

Solution

 

 

 

No power to the

No power at the socket.

Check there is power at the socket.

appliance

There is a power cut.

Check there is not a power cut by checking the

 

 

 

household lights.

 

The fuse has blown.

Check the fuse has not blown.

 

Thermostat control knob is set at „0“.

Check the thermostat control knob setting.

 

 

 

The temperature in the

The appliance is located in an unsuitable position.

Check the ambient temperature is within the

appliance is too high

 

appliances operating limits of 16 °C to 32 °C.

 

The thermostat control knob is set too low.

Check that the thermostat control knob is turned to

 

 

the correct setting relative to ambient conditions.

 

 

 

The temperature in the

The thermostat control knob is set too high.

Set the thermostat control knob to a lower

appliance is too low

 

position.

 

 

 

Excessive frost and ice

The door has been left open.

Check the door has not been left open.

has built up

Something is obstructing the door.

Check nothing is preventing the door from closing.

 

 

The door gasket is dirty.

Check the door gasket is intact and clean.

 

 

 

The appliance is noisy.

The appliance is not level.

Check if the appliance stands stable (all four feet

 

 

should be on the floor).

 

 

 

If after the above checks your appliance still does not operate correctly, contact your local Service Force Centre.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made, as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Operation failure

When the electronic system fails to detect the ACTUAL temperature, the alarm indicator will start to flash. The product will continue to operate with the use of a reserve system until the problem is eliminated by the local service personnel.

11

Image 11
Contents Zanussi Symbols below help you to find things more easily Maintenance and Cleaning Prior to installationInstallation Child SafetyAppliance and the Environment Safety precautions for isobutaneContents Description and main parts General informationOperation and use Switches and indicatorsBasket Storage Freezer TrayTo Make Ice Cubes Frozen Food StorageThawing FreezingFood Storage Energy Saving AdviceEvent of a Power Failure Hints & TipsWhen the Appliance is not in Use Maintenance & CleaningInternal Cleaning External CleaningSomething Not Working Problem Possible Cause Solution08705 Service and Spare PartsCustomer Care Department This Guarantee does not cover Guarantee ConditionsInstalling the appliance Instructions for the InstallerTechnical Specifications Levelling Door ReversalVentilation Requirements Electrical Connection BlueNeutral BrownLive ZE/68-1 Page Electrolux plc