Zanussi ZU 7120 F manual Building the appliance in unter a worktop, 550

Page 17

Building the appliance in unter a worktop

The dimensions of the recessed installation area must correspond with those indicated in the figure. The appliance could be inserted between two units (a) or as an end unit (b).

		600
	870	550
	870	600
	÷	600
	820	a
	820
		600
		b
	S.I.004

The plug socket necessary for connection of the appli- ance to the electricity supply should be positioned, so that the plug is not placed in the recess.

Fasten the side panel to the rear of the appliance with the fixing brackets.

Fasten the appliance to the worktop or the sides, applying the sealing strip between the refrigerator and adjacent cabinet using the fixing brackets (E).

S.I.005
SUPER.	INFER.

D326
SUPER.	INFER.
E
	E
D319

17

Image 17

Contents ZU 7120 F Contents Important Safety Instructions Operation Description of the ApplianceBefore use Freezer controlsAcoustic alarm Temperature controlStarting your appliance Freezing fresh foodIce making Health and Safety GuidelinesThawing Defrosting Internal cleaning Maintenance and CleaningPeriodic cleaning When the appliance is not in useSomething not WORKING? Symptom Solution No power to appliance08705 Service and Spare PartsCustomer Care Department Page Page Standard guarantee conditions Guarantee ConditionsEuropean Guarantee Exclusions Positioning Technical Specifications Installation Green and Yellow Earth Blue Neutral Brown Live Electrical ConnectionDoor reversal BUILDING-IN InstructionsGrid preparation 550 Building the appliance in unter a worktop50mm Fitting the plinth Electrolux Household Appliances Limited