How to Wire Your

Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation.

1.Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation) (Figure 9). Securely connect wires with wire connector supplied.

SUPPLY

BLACK AND BLUE

GROUND

FAN WIRES

WIRE

 

LISTED

WHITE SUPPLY

WIRE

CONNECTOR (3)

(NEUTRAL)

GREEN WIRE

 

(GROUND) FROM

WHITE FAN

HANGER BRACKET

WIRE

GREEN WIRE

BLACK SUPPLY

(GROUND) FROM

(HOT)

HANGER BALL

 

 

NOTE: CEILING COVER

 

OMITTED FOR CLARITY.

Figure 9

NOTE: If you are using an Emerson Light Fixture with your fan, see Light Fixture Owner’s Manual for wiring.

2.Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 9). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 9). After connections have been made, turn leads upward and carefully push leads into the outlet box, with the white and green leads on one side of the outlet box and the black and blue leads on the other side of the outlet box.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

3.Screw the two 1-1/4” threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 10).

4.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 10).

5.Secure the ceiling cover in place by sliding lockwashers (supplied) over the threaded studs and installing the two knurled knobs (supplied). (Figure 10.) Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling and the hole in the ceiling cover is clear of the downrod. Your fan is now wired to be turned on and off from the fan switch.

1-1/4"

 

THREADED

 

STUD

CEILING COVER

LOCKWASHER

 

KNURLED KNOB

 

Figure 10

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

Installing Fan Blades

1.Use four 10-32 x 3/8” pan head screws and flat washers (supplied) to secure the flange to the fan blade (ordered separately) (Figure 11). Repeat for the remaining four blades.

10-32 x 3/8"

PAN HEAD SCREW

FLAT WASHER

FAN BLADE

BLADE

FLANGE

Figure 11

6

Page 5 Page 7
Page 6
Image 6
Emerson CF2000WW02, CF2000AB02, CF2000PB02, CF2000AW02, CF2000WB02 How to Wire Your Ceiling Fan, Installing Fan Blades
Page 5 Page 7

CF2000WW02, CF2000AW02, CF2000WB02, CF2000PB02, CF2000PW02 specifications

The Emerson CF2000 series ceiling fans, which include models CF2000BC02, CF2000AB02, CF2000PW02, CF2000WB02, and CF2000AW02, are designed to enhance comfort and style in various living spaces. These fans are notable for their powerful performance, sleek designs, and energy-efficient technologies, making them an excellent choice for both residential and commercial applications.

One of the standout features of the CF2000 series is its advanced motor technology. Equipped with an ultra-efficient DC motor, these fans operate quietly while delivering maximum airflow. This motor not only reduces energy consumption but also prolongs the lifespan of the fan, making it a smart investment for any space. The fans are designed to offer multiple-speed settings, allowing users to customize airflow according to their preferences.

Aesthetic appeal is another hallmark of the CF2000 series. With a range of finishes, including brushed chrome, antique brass, white, walnut, and black, these fans can seamlessly integrate into various interior design schemes. The streamlined, modern blades are crafted for optimal performance and style, ensuring that the fan is not just a functional piece but also a striking addition to any room.

In terms of installation and usability, the Emerson CF2000 fans are designed with user-friendliness in mind. They come with a comprehensive guide that makes installation straightforward, even for those with minimal DIY experience. Many models in this series offer a reversible motor function, allowing them to provide both cooling airflow in the summer and warmth distribution during winter months, enhancing year-round comfort.

The CF2000 series also features integrated lighting options. Models may include energy-efficient LED light kits, allowing homeowners to illuminate their spaces while maintaining energy efficiency. This versatility makes the fans suitable for use in diverse settings, including living rooms, bedrooms, and open-concept spaces.

In summary, the Emerson CF2000BC02, CF2000AB02, CF2000PW02, CF2000WB02, and CF2000AW02 ceiling fans stand out for their powerful performance, stylish design, and energy-efficient technologies. With advanced motor systems, aesthetic diversity, ease of installation, and integrated lighting solutions, they are a perfect choice for anyone seeking to enhance their home's comfort and design.
Top Page Image Contents