Use of the refrigerator
Control Panel
JON/OFF light
KFridge button ON/OFF
LTemperature setting button (warmest)
MTemperature indicator
J.Light ON/OFF
K.Button ON/OFF
ON: Press the button (K). The pilot light (J) switches on.
OFF: Keep press the button (K) until the pilot light (J) and the temperautre indicator switched off.
L - N. Temperature setting buttons
The temperature can be adjusted between +2°C and +8°C.
By pressing the button (L or N), the current temperature setting flashes on the indicator. It is possible to modify the setting temperature only with flashed indicator. To set a warmer temperature, press button (L). To set a colder temperature, press button
(N). The indicator display the newly selected temperature for a few seconds and then shows again the inside compartment temperature.
The newly
Attention!
During the stability period by the first starting the temperature displayed can not correspond to the setting temperature. During this time it is possible that the temperature displayed is lower than the setting temperature.
M. Temperature indicator
During normal functioning the indicator shows the temperature inside the fridge.
J K L M N O P
NTemperature setting button (coldest)
OAuto fresh light
PAuto fresh button
Attention!
Difference between the temperature displayed and temperature setting is normal. Especially when:
-a new setting has recently been selected
-the door has been left open for a long time
-warm food has been placed in the compartment
O. Auto fresh pilot light
P. Auto fresh button
The maximum performance is obtained by setting the Auto fresh function. It’s recommended when loading large quantities of food.
Press the Auto fresh button (P).The relevant pilot light (O) switches on.
The internal temperature goes down to +2°C.
After about 6 hours the Auto fresh function switches off automatically.
Operation
Insert the plug in the power socket. Press the button ON/OFF (K). The fridge is switched on.
The fridge is
23