Building the appliance in
•Fit the appliance into the recess.
•Rotate the bracket of 180° in order to obtain the right position ( 2).
The position (1) is on the delivery.
•Fix it to the wali with the appropriate bracket.
•The top of the appliance must be kept ciear to allow better air circulation. If a wall unit is fitted above the appliance, there must be a gap of 50 mm between this unit and the wall and it must be at least 50 mm below the ceiling.
Fitting the plinth
Alignment height of 820 mm
•If using a 140 to 170 mm plinth, make a
•If using a plinth higher than 100 mm but less than 140 mm, cut the height compensation strip supplied with the appliance to the required depth and fit it between the plinth and the ventilation griile, pressing it into position below this grille.
30
1 |
2 |
50 |
50 |
25 |
820 |
|
870 |
|
170 |
|
220 |
|
| 140 |
30 | 190 |
100 |
|
140 |
190 |