Section 7: Optional Accessories

7

OPTIONAL ACCESSORIES

7.1 INTRODUCTION

This section contains details of the optional accessories available for the GT printer series:

Interface boards

Peelers

Cutters

Winders

RFID unit

Additional memory

7.2AVAILABLE INTERFACE BOARDS

Interface boards enable the printer to exchange data with computers, computer networks and related input/output devices. By installing different interface boards, you can adapt GT printers to fit in a wide range of related equipment and usage scenarios.

The following interface boards are available for the GT series:

¤Parallel interface board (IEEE1284) (optional or bundled)

¤Serial interface board (RS-232C) (optional)

¤USB interface board (optional)

¤10BaseT/100Base-TX LAN interface board (optional)

¤Wireless LAN IEEE802.11b interface board (optional)

¤10BaseT/100Base-TX mini LAN board (optional)

¤EXT connector (external signal interface) (optional)

For more advanced details on interfaces, see Section 5:

Interface Specifications.

Interface connector

Mini

LAN board

BeforeCautioninstalling or removing interface boards, be sure to turn off

the printer first. Discharge static electricity from your body before touching any of the electronic parts. Failure to observe these precautions can result in severe damage to the components.

GT Series Operator’s Manual

Page 7-1

Page 149
Image 149
SATO GT424 manual Available Interface Boards, Interface Specifications Interface connector Mini LAN board