Section 3: Configuration and Operation
With3.9.4thisChoosingsetting, youContinuouscan chooseorbetweenTearOffcontinuousOperationpaper feed or Tear Off operation. If a cutter or peeler has been installed correctly, you will also see the DISPENSER and CUTTER settings. If the printer supports linerless labels, you will also see LINERLESS option.
Press the 
buttons to select any one of the options. The default setting is CONTINUOUS.
Press the ENTER button to confirm the setting and proceed to the next screen.
The3.9.5printerBackfeedcan beOperationset to applySettingsor not apply a backfeed to the label before or after printing each label.
Press the 
buttons to choose from AFTER, BEFORE or NONE. The default setting is AFTER.
Press the ENTER button to confirm the setting and proceed to the next screen.
The3.9.6printerConfiguringcan be setthetoInternalapply orWindingnot applyUnita backfeed to the label before or after printing each label.
Press the 
/ 
buttons to choose from AFTER, BEFORE or NONE. The default setting is AFTER.
Press the ENTER button to confirm the setting and proceed to the next screen.
Page | GT Series Operator’s Manual |
