SATO GT424 manual HEX Dump Mode

Section 3: Configuration and Operation

3.10 HEX DUMP MODE

13.10Press.1Enteringthe LINEHEXbuttonDumpto takeModethe printer OFFLINE.

2Pull down the cover of the Operation Panel and press ENTER. The ONLINE MODE screen appears.

Press the arrow buttons until you see “HEX DUMP MODE”, then press ENTER to perform the first setting. At any

time within this mode, pressing CANCEL takes you back one screen. Pressing the FUNCTION button returns you immediately to the main Hex Dump screen.

Here3.10.2youSelectingcan chooseDatato TodumpDumpeither incoming data (receive data) or print data already stored in the buffer (receive buffer) .

Press the buttons to choose RECEIVE DATA or RECEIVE BUFFER. Note that RECEIVE BUFFER cannot be selected when there is no received data.

Press the ENTER button to confirm the setting and proceed to the next screen.

During3.10.3theControllingHEX Dump,thetheHexfollowingDumpModescreen appears. The number of labels printed will be shown. When printing is done, press the LINE button to take printer OFFLINE. The press ENTER to return to the main HEX DUMP Mode screen.

If you dumping the RECEIVE BUFFER, take the printer OFFLINE to stop any incoming data from affecting the buffer. Only then can the buffered data be printed. The printer goes ONLINE automatically after the printing.

Page -24 GT Series Operator’s Manual