SATO GT424 manual External interface

						Section 1: Introduction
1.1 GENERAL SPECIFICATIONS (CONT’D)
	Specification/
			GT408		GT412	GT424
	Model Name
	External interface		Interface board
			¤ Parallel (IEEE1284)
			¤ RS-232C
			• READY/BUSY
			• XON/XOFF
			• Status 2/3
			• Driver specific protocol
			• Status 5
			¤ USB (Ver. 2.0)
			¤ LAN (10BASE-T/ 100BASE-TX automatic changeover)
			¤ Wireless LAN (IEEE802.11b)
			¤ Mini LAN (10BASE-T/ 100BASE-TX automatic changeover)
			External (EXT) signal interface (14-pin)
		Buttons	LINE, FEED
	Operation		FUNCTION, 4 navigation buttons (up/down/left/right), ENTER, CANCEL
	Panel
		Switch	POWER ON/OFF
		LCD	Green LCD (with backlight), Vertical 32 dots x horizontal 128 dots, displaying up to five
			icons at the top of the screen
		LEDs	POWER, ONLINE, STATUS, LABEL, RIBBON status indicators
		Adjustment	VOLUME:	buzzer loudness adjustment
		Potentiometer	PITCH:	print-head pitch adjustment
			OFFSET:	tear off, peel, and cutter stop position adjustment
			DARKNESS:	print density adjustment
	Sensor		Paper sensor: reflection type, penetration type
	Memory cartridge		16 MB FLASH ROM, 4 MB non-volatile user memory
	Print Format		Transmitted from host (computer) or recalled from print formats stored by user
			on memory card (optional)
	Stored	Standard	X20 5 x 9 dots (alphanumeric, symbol, and kana)
	Font Types		X21 17 x 17 dots (alphanumeric, symbol, and kana)
			X22 24 x 24 dots (alphanumeric, symbol, and kana)
			X23 48 x 48 dots (alphanumeric, symbol, and kana)
			X24 48 x 48 dots (alphanumeric, symbol, and kana)
			Outline font (alphanumeric, symbol, and kana)
			OCR-A GT408 15 x 22 dots (alphanumeric and symbol)
			GT412 22 x 33 dots (alphanumeric and symbol)
			GT424 44 x 66 dots (alphanumeric and symbol)
			OCR-B GT408 20 x 24 dots (alphanumeric and symbol)
			GT412 30 x 36 dots (alphanumeric and symbol)
			GT424 60 x 72 dots (alphanumeric and symbol)
		Truetype Fonts	CG Times (alphanumeric and symbol)
			CG Triumvirate (alphanumeric and symbol)
		Kanji Fonts	16 x 16 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
		(where applica-	24 x 24 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
		ble)	22 x 22 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
			32 x 32 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
			40 x 40 dots (JIS level-1 and -2 kanji sets. Selectable either Mincho or Gothic)
			Kanji outline font

GT Series Operator’s Manual Page 1-5