3.7 | Cartridge Mode | |
3.7.1 | Entering Cartridge Mode | |
3.7.2 | Cartridge Formatting Option | |
3.7.3 | Start Cartridge Formatting | |
3.7.4 | Cartridge Formatting Progress |
3.8 | SEMBL Mode | |
3.8.1 | Entering SEMBL Mode | |
3.8.2 | Selecting The Start Program | |
3.8.3 | The SEMBL Status Screen |
3.9 | Advanced Mode | |
3.9.1 | Entering Advanced Mode | |
3.9.2 | Selecting The Print Density | |
3.9.3 | Setting the Automatic Detection of Optional Units | |
3.9.4 | Choosing Continuous or Tear Off Operation | |
3.9.5 | Backfeed Operation Settings | |
3.9.6 | Configuring the Internal Winding Unit | |
3.9.7 | Setting the Print Mode | |
3.9.8 | Configuring the Paper Sensor | |
3.9.9 | Configuring the Paper Sensor Type | |
3.9.10 | Turning Head Check Function ON/OFF | |
3.9.11 | Choosing the Type of Head Check | |
3.9.12 | Enabling/Disabling External Signal Output | |
3.9.13 | Selecting the Type of External Signal Output | |
3.9.14 | Selecting Reprint via External Signal Output | |
3.9.15 | Using the Auto Online Feature | |
3.9.16 | Enabling Auto Feed | |
3.9.17 | Enabling Auto Feed On Error | |
3.9.18 | Specifying the Protocol Code Format | |
3.9.19 | Specifying The SEMBL Start Mode | |
3.9.20 | Specifying The SEMBL Auto Start Program |
3.10 | HEX Dump Mode | |
3.10.1 | Entering HEX Dump Mode | |
3.10.2 | Selecting Data To Dump | |
3.10.3 | Controlling the Hex Dump Mode |
3.11 | Test Print Mode | |
3.11.1 | Entering Test Print Mode | |
3.11.1 | Choosing What The Test Print Contains | |
3.11.2 | Setting Test Print Width for Configuration, Barcode and Head Check | |
3.11.3 | Setting the Size of the Factory Test Print | |
3.11.4 | Starting the Test Print |
3.12 | Overview of All Modes | |
3.13 | Restoring Factory DeFault Settings | |
3.13.1 | Entering Default Mode | |
3.13.2 | If You Chose to Reset Printer Settings | |
3.13.2 | If You Chose Alt Protocol Code | |
3.13.3 | Completion of Default Setting | |
3.14 | Understanding Continuous Print and Tear Off Operations |
ii
