Zanussi ZBB26650SA manual Positioning, Electrical Connection, Door reversibility

Page 11

Positioning

Install this appliance at a location where the ambient tem- perature corresponds to the climate class indicated on the rating plate of the appliance:

Climate

Ambient temperature

class

 

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Electrical Connection

Caution! Any electrical work required to install this appliance should be carried out by a qualified

electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability should these safety measures not be observed.

A B

C

D

E

Important! The wires in the mains lead are coloured in accordance with the following code:

A

Green and Yellow:

Earth

C

Brown:

Live

D

Blue:

Neutral

www.zanussi.com

As the colours of the wires in the mains lead of this appli- ance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

1.Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the earth symbol or coloured green and yellow.

2.Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black.

3.Connect the wire coloured brown to the terminal ei- ther marked with the “L“ or coloured red.

4.Check that no cut, or stray strands of wire is present and the cord clamp E is secure over the outer sheath.

5.Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

6.Switch on the appliance.

The appliance is supplied with a 13 amp plug fitted B. In the event of having to change the fuse in the plug sup- plied, a 13 amp ASTA approved (BS 1362) fuse must be used.

Warning! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure

that it is disposed of safely.

Door reversibility

The door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance:

 

S

1 Loosen the upper pin

3 Loosen the middle

and remove the spacer.

hinge.

2Remove the upper pin and the upper door.

11

Image 11
Contents Fridge-Freezer ZBB26650SA Safety information ContentsDaily Use Care and cleaningInstallation ServiceControl panel Shopping Function Temperature regulationExcessive temperature alarm Functions menuDaily use First useHelpful hints and tips Care and cleaningDefrosting of the freezer Periodic cleaningWhat to do if… Defrosting the refrigeratorWarm Set a warmer temperature Switch on the applianceNot shut properly QuentlyClosing the door Technical dataInstallation Replacing the lampDoor reversibility PositioningElectrical Connection Installing the appliance Part Ha As in figureFit the cover D PliedEnvironmental concerns Page 222344529-A-472011