Installing the appliance

On the opposite side:

1	Install the lower pin.
2	Install the lower door.
3	Tighten the middle
hinge.
4	Install the upper door.
5	Tighten the spacer and

4Remove the lower door.

4Loosen the lower pin.

the upper pin.

1If necessary cut the adhesive sealing strip and then apply it to the appli- ance as shown in figure.

2 Install the appliance in

the niche.

Push the appliance in the

direction of the arrows (1)

Ventilation requirements

The airflow behind the ap- pliance must be sufficient.

6 cm

min. 200cm2

min.

200cm2

until the upper gap cover

stops against the kitchen

furniture.

Push the appliance in the

direction of the arrows (2)

against the cupboard on

the opposite side of the

hinge.

Caution! Make sure that the mains cable can move freely.

Do the following steps:

4mm

44mm

3Adjust the appliance in the niche.

Make sure that the dis- tance between the appli- ance and the cupboard front-edge is 44 mm. The lower hinge cover (in the accessories bag) makes sure that the dis- tance between the appli- ance and the kitchen fur- niture is correct.

Open the door. Put the lower hinge cover in posi- tion.

4Attach the appliance to the niche with 4 screws.